Technical Data; Definitions: Safety Guidelines - DeWalt XR Li-Ion DCD701 Original Instructions Manual

SUBCOMPACT DRILL/DRIVER
DCD701
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
Power output
No-load speed
1st gear
2nd gear
Max. Torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a =
h,D
Uncertainty K =
Screwdriving
Vibration emission value a =
h
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN62841 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
WALT one of the EC-Declaration of Conformity
E
Machinery Directive
DCD701
V 12
DC
Sub-Compact Drill/Driver
1
DCD701
Li-Ion
D WALT declares that these products described under Technical
E
W 250
Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-1:2010.
min -1 0–425
These products also comply with Directive 2014/30/EU and
-1
min
0–1500
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
Nm 57.5/25.5
The undersigned is responsible for compilation of the technical
mm 10
file and makes this declaration on behalf of D
mm 20
mm 10
kg 0.87
Markus Rompel
Vice-President Engineering, PTE-Europa
dB(A) 72
D WALT , Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
dB(A) 83
06.12.2018
dB(A) 3
2
m/s 2.5

Definitions: Safety Guidelines

m/s 2 1.5
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
m/s 2 < 2.5
these symbols.
2
m/s 1.5
and the accessories, keep the hands warm, organisation of
work patterns.
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
ENGLISH
WALT at
E
WALT .
E
5