Charging Methods; Connecting To Computer - Philips VideoTracer VTR8410 User Manual

Reminder
• The device uses undetachable lithium batteries. If the
device is left unused for a long time, please long press
"ON/OFF" button to choose from "Shutdown" and
"Restart". When you choose Shutdown, the device will
be shut down normally.
• If the record does not work properly, please check if the
device is out of power.
• During operation please do not pull out the external
memory card. Otherwise, damage might be caused to
the files or the device.
• When battery volume shows
device timely.

4.2 Charging Methods

(1)Use USB cable to connect the device with PC, the
indicator will show green light during charging, which will
be extinguished after the device is fully charged.
(2)Use USB data cable and the connector to charge the
device. The device indicator will show green light first,
which will be extinguished after the device is fully charged.
46 EN
, please charge your
Reminder
• The device can be charged either during ON or OFF
mode. Normally, during OFF mode charging, it takes
around 4 hours for full charging. During ON mode, it
takes around 5 hours for full charging (we recommend
that you use OFF mode charging).

4.3 Connecting to Computer

The recorder can be used as a large-volume USB storage de-
vice, which can be connected to the computer. No software
needs to be installed, the recorder will be connected directly
to the computer.
Reminder
• When importing/exporting the files from or to the
device, do not disconnect the recorder from the
computer.
• USB connect to PC: they can be directly connected when
the device is turned on; when the device is off, please
press the power button and connect the computer after
the device is turned on.