Charging Methods; Connecting To Computer - Philips VideoTracer VTR8102 User Manual

4.2 Charging methods

(1)Use USB cable to connect the device with PC, the
indicator will show green light during charging.
(2)Use USB cable and the connector to charge the device.
The device indicator will show green light first, which will
be extinguished after the device is fully charged.
Reminder
• The device can be charged either during ON or OFF
mode. Normally, during OFF mode charging, it takes
around 4 hours for full charging. During ON mode, it
takes around 6 hours for full charging (we recommend
that you use OFF mode charging).

4.3 Connecting to computer

The recorder can be used as a large-volume USB storage
device, which can be connected to the computer. No soft-
ware needs to be installed for VTR8102. The recorder will
be shown as a portable device. The icon of connecting to
computer is shown in the figure below.
34 EN
Reminder
• When the file are moved from the PC to the VideoTracer,
please do not disconnect the device from the PC.