Download Print this page
Speco O5P2 Quick Start Manual
Hide thumbs Also See for O5P2:

Advertisement

Quick Links

Quick Start Guide
O5P2

Advertisement

loading
Need help?

Need help?

Do you have a question about the O5P2 and is the answer not in the manual?

Questions and answers

Summary of Contents for Speco O5P2

  • Page 1 Quick Start Guide O5P2...
  • Page 2 This owner's manual is designed to be a reference tool for your system. Please read this manual carefully before operating the unit and retain it for future reference. Should you require any technical assistance, contact Speco Technologies Tech Support at 1-800-645-5516 Important Safeguards and Warning 1.
  • Page 3 Technologies reserves the right to modify these without notice and without incurring any obligation. Speco Technologies is not liable for any loss caused by improper operation. Note: Before installation, check the package and make sure that all components are included.
  • Page 4 Camera Quick start guide 2 tapping screws PA 4×25 Screwdriver ×2 Plastic plug Wall mounting bracket Drill template Overview Overview Microphone Ethernet connector Micro SD card slot Audio input connector Reset DC power connector...
  • Page 5: Connecting Network Cable

    DC12V * 1 It is recommended to install the security cap for outdoor installations. * 2 DC 12V power supply is not required if a PoE switch or injector is used to power the camera. ► Connecting Network Cable ① Loosen the nut from the main element. ②...
  • Page 6: Installation

    Installation * Before you start, please make sure that the wall or ceiling is strong enough to withstand three times the weight of the camera and bracket. ① Loosen the lock screw of the bracket and then remove the mounting base from the bracket. Mounting base Lock screw ②...
  • Page 7 ④ Fix the mounting base of the bracket onto the wall with the screws. ⑤ Connect the cables. Then attach the bracket onto the mounting base and fasten them with the lock screw. ⑥ Adjust the camera to obtain an optimum angle . Before adjustment, preview the image of the camera on a monitor.
  • Page 8 ⑦ Install the lower dome back to the camera with the screws. Web Operation and Login IP Scanner can search for the device on the local network. ● Operation ① Make sure that the camera and the PC are connected to the same local network.
  • Page 9 O5P2 5C:F2:07:25:68:9A ③ In the device list, you can view the IP address, model number, and MAC address of each device. Select the applicable device and double click to open up the web viewer. You can also manually enter the IP address in the address bar of the web browser.