Buick 2007 LaCrosse Owner's Manual page 259

o p
SEEK : Press the left arrow to go to the
start of the current or the previous track. Press the
right arrow to go to the start of the next track.
To scan tracks, press and hold either arrow
for more than two seconds. SCAN will appear on
the display. The radio will go to the next track,
play 10 seconds, then go on to the next track.
DISP (Display): Press this button to see how long
the current track has been playing. The elapsed
time of the track will appear on the display.
To change the default on the display, track or
elapsed time, press this button until you see
the display you want, then hold the button for
two seconds. The radio will produce one beep
and the selected display will now be the default.
BAND: Press this button to listen to the radio
when a CD is playing. The inactive CD will remain
safely inside the radio for future listening.
CD: Press this button to play a CD when listening
to the radio. The CD symbol will appear on the
display when a CD is loaded.
EQ (Equalization): Press EQ to select an
equalization setting while playing a CD. The
equalization will be set whenever a CD is played.
See "EQ" listed previously for more information.
If you select an EQ setting for your CD, it will
be activated each time you play a CD.
(Eject): Press this button to eject a CD. Eject
Z
may be activated with either the ignition or radio
off. CDs may be loaded with the ignition and radio
off if this button is pressed first.
Playing an MP3 CD-R Disc
Your vehicle's radio system may have the MP3
feature. If it has this feature, it is capable of playing
an MP3 CD-R disc. For more information on
how to play an MP3 CD-R disc, see Using an MP3
on page 272 later in this section.
259