Buick 2006 Rendezvous Owner's Manual

Buick 2006 Rendezvous Owner's Manual

Hide thumbs Also See for 2006 Rendezvous:
Table of Contents

Advertisement

2006 Buick Rendezvous Owner Manual
Seats and Restraint Systems ........................... 1-1
Front Seats
............................................... 1-3
Rear Seats
............................................... 1-8
Safety Belts
............................................. 1-22
Child Restraints
....................................... 1-45
Airbag System
......................................... 1-72
Restraint System Check
Features and Controls ..................................... 2-1
Keys
........................................................ 2-3
Doors and Locks
....................................... 2-8
Windows
................................................. 2-13
Theft-Deterrent Systems
Starting and Operating Your Vehicle
Mirrors
.................................................... 2-31
®
OnStar
System
...................................... 2-32
Universal Home Remote System
Storage Areas
......................................... 2-38
Sunroof
.................................................. 2-46
Vehicle Personalization
Instrument Panel ............................................. 3-1
Instrument Panel Overview
Climate Controls
...................................... 3-28
Warning Lights, Gages, and Indicators
Message Center
....................................... 3-51
............................ 1-87
............................ 2-15
........... 2-19
................ 2-34
............................. 2-47
.......................... 3-4
........ 3-37
Driver Information Center (DIC)
Audio System(s)
....................................... 3-74
Driving Your Vehicle ....................................... 4-1
Your Driving, the Road, and Your Vehicle
Towing
................................................... 4-36
Service and Appearance Care .......................... 5-1
Service
..................................................... 5-3
Fuel
......................................................... 5-4
Checking Things Under the Hood
All-Wheel Drive
........................................ 5-43
Bulb Replacement
Windshield Replacement
Windshield Wiper Blade Replacement
Tires
...................................................... 5-51
Appearance Care
..................................... 5-91
Vehicle Identification
Electrical System
.................................... 5-100
Capacities and Specifications
Maintenance Schedule ..................................... 6-1
Maintenance Schedule
Customer Assistance and Information .............. 7-1
Customer Assistance and Information
Reporting Safety Defects
Index ................................................................ 1
M
.................. 3-60
................. 5-9
.................................... 5-44
........................... 5-49
......... 5-49
................................. 5-99
................... 5-106
................................ 6-2
........... 7-2
........................... 7-13
..... 4-2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2006 Rendezvous and is the answer not in the manual?

Questions and answers

Summary of Contents for Buick 2006 Rendezvous

  • Page 1 2006 Buick Rendezvous Owner Manual Seats and Restraint Systems ... 1-1 Front Seats ... 1-3 Rear Seats ... 1-8 Safety Belts ... 1-22 Child Restraints ... 1-45 Airbag System ... 1-72 Restraint System Check ... 1-87 Features and Controls ... 2-1 Keys ...
  • Page 2: How To Use This Manual

    GENERAL MOTORS, GM, the GM Emblem, BUICK, the BUICK Emblem, and the name RENDEZVOUS are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time without notice.
  • Page 3: Safety Warnings And Symbols

    Index A good place to quickly locate information about the vehicle is the Index in the back of the manual. It is an alphabetical list of what is in the manual and the page number where it can be found. Safety Warnings and Symbols There are a number of safety cautions in this book.
  • Page 4: Vehicle Damage Warnings

    Vehicle Damage Warnings Also, in this manual you will find these notices: Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly.
  • Page 5 These are some examples of symbols that may be found on the vehicle:...
  • Page 6 NOTES...
  • Page 7: Table Of Contents

    Section 1 Front Seats ...1-3 Manual Seats ...1-3 Six-Way Power Seats ...1-4 Manual Lumbar ...1-5 Heated Seats ...1-5 Reclining Seatbacks ...1-6 Head Restraints ...1-8 Rear Seats ...1-8 Rear Seat Operation ...1-8 Split Bench Seats ...1-8 Captain Chairs ...1-14 Stowable Seat ...1-18 Safety Belts ...1-22 Safety Belts: They Are for Everyone ...1-22 Questions and Answers About Safety Belts ...1-26...
  • Page 8 Section 1 Airbag System ...1-72 Where Are the Airbags? ...1-75 When Should an Airbag Inflate? ...1-77 What Makes an Airbag Inflate? ...1-79 How Does an Airbag Restrain? ...1-79 What Will You See After an Airbag Inflates? ...1-80 Passenger Sensing System ...1-81 Seats and Restraint Systems Servicing Your Airbag-Equipped Vehicle ...1-85 Adding Equipment to Your Airbag-Equipped...
  • Page 9: Manual Seats

    Front Seats Manual Seats CAUTION: You can lose control of the vehicle if you try to adjust a manual driver’s seat while the vehicle is moving. The sudden movement could startle and confuse you, or make you push a pedal when you do not want to.
  • Page 10: Six-Way Power Seats

    Six-Way Power Seats If your vehicle has this feature, the power seat control is located on the outboard side of the seat(s). • Move the front of the control up or down to adjust the front portion of the seat up or down. •...
  • Page 11: Manual Lumbar

    Manual Lumbar The knob that controls this feature is located on the outboard sides of the driver’s and front passenger’s seats. Turn the knob toward the front of the vehicle to increase lumbar support. Turn the knob toward the rear of the vehicle to decrease lumbar support.
  • Page 12: Reclining Seatbacks

    Reclining Seatbacks To adjust a seatback, pull up on the lever located on the outboard side of the driver’s or front passenger’s seats. Release the lever to lock the seatback where you want it. Push and pull on the seat to make sure it is locked into position.
  • Page 13 Do not have a seatback reclined if your vehicle is moving. CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job because it will not be against your body.
  • Page 14: Rear Seat Operation

    Head Restraints Adjust your head restraint so that the top of the restraint is closest to the top of your head. This position reduces the chance of a neck injury in a crash. The head restraints are adjustable. Slide the head restraint up or down to adjust it.
  • Page 15: Folding Or Reclining The Seatbacks

    Folding or Reclining the Seatbacks CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.
  • Page 16: Removing The Split Bench Seat

    Removing the Split Bench Seat Each section of the split bench seat can be flipped forward or removed individually. 1. Unlatch the shoulder belt from the lap-belt. 2. Make sure that the seatback is in the upright position. 3. Lift up or push forward on the seatback recliner lever to fold the seatback forward.
  • Page 17 For up-level split bench seats, continue pushing forward on the recliner lever to release the rear latches from the floor pins and flip the seat forward. 5. To release the front latches, squeeze the angled 6. Remove the seat by rocking it slightly toward the Repeat these steps for the other section of the split bench seat.
  • Page 18: Replacing The Split Bench Seat

    Replacing the Split Bench Seat CAUTION: If the seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatback to be sure it is locked.
  • Page 19 1. Squeeze the angled latch release bar toward the straight crossbar while placing the front hooks of the bench seat onto the front two floor pins. 2. Make sure that the bench seat is angled so that the front hooks clear the floor pins.
  • Page 20: Captain Chairs

    3. Firmly push the rear hooks onto the rear floor pins by pushing down on the rear of the seat. 4. Try to raise the seat to check that it is locked down. 5. Lift the seatback recliner lever and raise the seatback until it locks upright.
  • Page 21: Removing The Captain's Chairs

    To recline the seatback, lift up on the recliner lever located on the outboard side of the seatback. Use the recliner lever to move the seatback to the desired position. It is easier to raise or lower the seatback if you lean forward and take the weight off the seatback.
  • Page 22: Replacing The Captain's Chairs

    4. The seat can then be lifted off the front floor pins. 5. Remove the seat by rocking it slightly toward the rear of the vehicle and then pulling it out. Repeat these steps for the other captain’s chair. 1-16 Replacing the Captain’s Chairs CAUTION: If the seatback is not locked, it could move...
  • Page 23 CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safety belts are properly routed and attached, and are not twisted.
  • Page 24: Folding The Seatback

    2. Push the rear of the seat down to lock the rear latches onto the rear set of floor pins. 3. Push and pull on the seat to check that it is properly attached. 1-18 Stowable Seat The stowable seat is a two passenger bench seat and comes with the rear convenience center.
  • Page 25 To fold the seatback down, pull up on the lever located on the back of the seat. Push down on the seatback until it is locked into place. Push and pull on the seatback to make sure that it is locked into place.
  • Page 26: Replacing The Stowable Seat

    Removing the Stowable Seat 1. Remove the convenience center, if it is in the vehicle. See Rear Convenience Center on page 2-43 for more information. 2. Make sure all items are off the stowable seat. 3. If the seatback is down, put the seatback in its upright position before removing the seat.
  • Page 27 CAUTION: A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After installing the seat, always check to be sure that the safety belts are properly routed and attached, and are not twisted.
  • Page 28: Safety Belts: They Are For Everyone

    Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Do not let anyone ride where he or she cannot wear a safety belt properly.
  • Page 29: Why Safety Belts Work

    Your vehicle has a light that comes on as a reminder to buckle up. See Safety Belt Reminder Light on page 3-40. In most states and in all Canadian provinces, the law says to wear safety belts. Here is why: They work. You never know if you will be in a crash.
  • Page 30 Put someone on it. 1-24 Get it up to speed. Then stop the vehicle. The rider does not stop.
  • Page 31 The person keeps going until stopped by something. or the instrument panel... In a real vehicle, it could be the windshield... 1-25...
  • Page 32: Questions And Answers About Safety Belts

    or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. 1-26 Questions and Answers About Safety Belts...
  • Page 33: How To Wear Safety Belts Properly

    If I am a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you are in an accident — even one that is not your fault — you and your passengers can be hurt.
  • Page 34 3. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.
  • Page 35 6. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder belt. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
  • Page 36 What is wrong with this? The shoulder belt is too loose. It will not give nearly as much protection this way. 1-30 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
  • Page 37 What is wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen. The belt forces would be there, not at the pelvic bones.
  • Page 38 What is wrong with this? The belt is over an armrest. 1-32 CAUTION: You can be seriously injured if your belt goes over an armrest like this. The belt would be much too high. In a crash, you can slide under the belt.
  • Page 39 What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
  • Page 40 What is wrong with this? The belt is twisted across the body. 1-34 CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to fix it.
  • Page 41: Shoulder Belt Height Adjustment

    To unlatch the belt, just push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
  • Page 42: Safety Belt Use During Pregnancy

    Safety Belt Use During Pregnancy Safety belts work for everyone, including pregnant women. Like all occupants, they are more likely to be seriously injured if they do not wear safety belts. A pregnant woman should wear a lap-shoulder belt, and the lap portion should be worn as low as possible, below the rounding, throughout the pregnancy.
  • Page 43: Lap-Shoulder Belt

    Lap-Shoulder Belt The positions next to the windows have lap-shoulder belts. Here is how to wear a lap-shoulder belt properly. 1. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The shoulder belt may lock if you pull the belt across you very quickly.
  • Page 44 3. To make the lap part tight, pull down on the buckle end of the belt as you pull up on the shoulder part. The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones.
  • Page 45 CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury. The shoulder belt should fit against your body. To unlatch the belt, push the button on the buckle. 1-39...
  • Page 46: Center Rear Passenger Position

    Center Rear Passenger Position Lap-Shoulder Belt If your vehicle has a bench seat, someone can sit in the center position. When you sit in the center seating position, you have a lap safety belt, which has no retractor. You also have a shoulder belt, which has a retractor.
  • Page 47 2. Insert the metal knob on the shoulder belt into the 3. To make the lap belt longer, tilt the latch plate and keyhole on the lap belt buckle as shown. Be sure pull it along the belt. to slide the shoulder belt part into the keyhole until it locks into place.
  • Page 48: Rear Safety Belt Comfort Guides

    To make the belt shorter, pull its free end as shown until the belt is snug 4. Buckle, position and release the lap-shoulder belt the same way as the other lap-shoulder belts. If the belt is not long enough, see Safety Belt Extender on page 1-45.
  • Page 49 Here is how to install a comfort guide and use the safety belt: 2. Attach the elastic cord to the comfort guide on the center passenger shoulder belt. Second Row Center Position For second row center position do the following: 1.
  • Page 50 1-44 CAUTION: A safety belt that is not properly worn may not provide the protection needed in a crash. The person wearing the belt could be seriously injured. The shoulder belt should go over the shoulder and across the chest. These parts of the body are best able to take belt restraining forces.
  • Page 51: Safety Belt Pretensioners

    Safety Belt Pretensioners Your vehicle has safety belt pretensioners for the driver and right front passenger. Although you cannot see them, they are located on the retractor part of the safety belts. They help the safety belts reduce a person’s forward movement in a moderate to severe frontal or near frontal crash.
  • Page 52 What is the proper way to wear safety belts? An older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide. The shoulder belt should not cross the face or neck. The lap belt should fit snugly below the hips, just touching the top of the thighs.
  • Page 53 What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? If the child is sitting in a seat next to a window, move the child toward the center of the vehicle.
  • Page 54: Infants And Young Children

    Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
  • Page 55 CAUTION: Children who are up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
  • Page 56 What are the different types of add-on child restraints? Add-on child restraints, which are purchased by the vehicle’s owner, are available in four basic types. Selection of a particular restraint should take into consideration not only the child’s weight, height and age but also whether or not the restraint will be compatible with the motor vehicle in which it will be used.
  • Page 57: Child Restraint Systems

    CAUTION: The body structure of a young child is quite unlike that of an adult or older child, for whom the safety belts are designed. A young child’s hip bones are still so small that the vehicle’s regular safety belt may not remain low on the hip bones, as it should.
  • Page 58 A rear-facing infant seat (B) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a crash, acts to keep the infant positioned in the restraint. 1-52 A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields.
  • Page 59 A booster seat (F-G) is a child restraint designed to improve the fit of the vehicle’s safety belt system. Some booster seats have a shoulder belt positioner, and some high-back booster seats have a five-point harness. A booster seat can also help a child to see out the window.
  • Page 60: Where To Put The Restraint

    When choosing a child restraint, be sure the child restraint is designed to be used in a vehicle. If it is, it will have a label saying that it meets federal motor vehicle safety standards. Then follow the instructions for the restraint. You may find these instructions on the restraint itself or in a booklet, or both.
  • Page 61: Lower Anchors And Tethers For Children (Latch)

    CAUTION: (Continued) Even though the passenger sensing system is designed to turn off the passenger’s frontal airbag if the system detects a rear-facing child restraint, no system is fail-safe, and no one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off.
  • Page 62 In order to use the LATCH system in your vehicle, you need a child restraint equipped with LATCH attachments. The child restraint manufacturer will provide you with instructions on how to use the child restraint and its attachments. The following explains how to attach a child restraint with these attachments in your vehicle.
  • Page 63 Top Tether Anchor A top tether (A, C) anchors the top of the child restraint to the vehicle. A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
  • Page 64 Lower Anchor and Top Tether Anchor Locations (Lower Anchor): Seating positions with two lower anchors. Seating positions with top tether anchors. Second Row — Captains Chairs 1-58 (Top Tether Anchor): Second Row — (Lower Anchor): Seating positions with two lower anchors. (Top Tether Anchor): Seating positions with top tether anchors.
  • Page 65 To assist you in locating the lower anchors, each seating position with lower anchors has two labels, near the crease between the seatback and the seat cushion, showing where the anchors are located. To assist you in locating the top tether anchors, look for this symbol.
  • Page 66 Second Row Outside Position Bench Seat For second row outboard seating positions, the top tether anchors are exposed and located at the rear of the seat cushions. Be sure to use an anchor located on the same side of the vehicle as the seating position where the child restraint will be placed.
  • Page 67 Second Row Center Position Bench Seat with Third Row Seat If the vehicle has a third row seat and the seatback is upright, there is an anchor strap located between the third row seatback and cushion to anchor the child restraint for the second row center position bench seat.
  • Page 68 If you are using a top tether equipped child restraint in the second row center bench seat and need to temporarily transport a flat tire for repair, move the child restraint to a rear seat outboard position. See Securing a Child Restraint in a Rear Outside Seat Position on page 1-65 for more information including important safety information.
  • Page 69: Securing A Child Restraint Designed For The Latch System

    Securing a Child Restraint Designed for the LATCH System CAUTION: If a LATCH-type child restraint is not attached to anchors, the restraint will not be able to protect the child correctly. In a crash, the child could be seriously injured or killed. Make sure that a LATCH-type child restraint is properly installed using the anchors, or use the vehicle’s safety belts to secure the restraint,...
  • Page 70 4. Attach and tighten the lower attachments on the child restraint to the lower anchors, if equipped, in the vehicle. The child restraint instructions will show you how. 5. If the child restraint is forward-facing, attach and tighten the top tether to the top tether anchor. Refer to the child restraint instructions and the following steps: 5.1.
  • Page 71: Securing A Child Restraint In A Rear Outside Seat Position

    Securing a Child Restraint in a Rear Outside Seat Position If your child restraint is equipped with the LATCH system, see Lower Anchors and Tethers for Children (LATCH) on page 1-55. There is no top tether anchor in the 3rd row driver’s-side position.
  • Page 72 3. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to. 1-66 4. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
  • Page 73: Securing A Child Restraint In The Center Rear Seat Position

    5. If your child restraint has a top tether and the position that you are using has a top tether anchor, attach and tighten the top tether to the top tether anchor. Refer to the instructions that came with the child restraint and to step 5 under Lower Anchors and Tethers for Children (LATCH) on page 1-55.
  • Page 74 Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. 1. Make the belt as long as possible by tilting the latch plate and pulling it along the belt. 2.
  • Page 75: Securing A Child Restraint In The Right Front Seat Position

    To remove the child restraint, if the top tether is attached to the top tether anchor, disconnect it. Unbuckle the vehicle’s safety belt. When you remove the child restraint, be sure to reconnect the lap and shoulder parts of the belt so they will be ready to work for an adult or larger child passenger.
  • Page 76 There is no top tether anchor at the right front seating position. Do not secure a child seat in this position if a national or local law requires that the top tether be anchored or if the instructions that come with the child restraint say that the top tether must be anchored.
  • Page 77 5. Pull the rest of the shoulder belt all the way out 6. To tighten the belt, push down on the child restraint, of the retractor to set the lock. pull the shoulder portion of the belt to tighten the lap portion of the belt and feed the shoulder belt back into the retractor.
  • Page 78: Airbag System

    7. Push and pull the child restraint in different directions to be sure it is secure. 8. If your vehicle has the passenger sensing system and the airbag is off, the off indicator will be lit and stay lit in the inside rearview mirror when the key is turned to ON or START.
  • Page 79 CAUTION: (Continued) hitting things inside the vehicle or being ejected from it. Airbags are “supplemental restraints” to the safety belts. Airbags are designed to work with safety belts but do not replace them. Frontal airbags for the driver and right front passenger are designed to deploy in moderate to severe frontal and near frontal crashes.
  • Page 80 CAUTION: Anyone who is up against, or very close to, any airbag when it inflates can be seriously injured or killed. Airbags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
  • Page 81: Where Are The Airbags

    Where Are the Airbags? The driver’s frontal airbag is in the middle of the steering wheel. The right front passenger’s frontal airbag is in the instrument panel on the passenger’s side. 1-75...
  • Page 82 If your vehicle has one, the driver’s side impact airbag is in the side of the driver’s seatback closest to the door. 1-76 If your vehicle has one, the right front passenger’s side impact airbag is in the side of the passenger’s seatback closest to the door.
  • Page 83: When Should An Airbag Inflate

    CAUTION: If something is between an occupant and an airbag, the airbag might not inflate properly or it might force the object into that person causing severe injury or even death. The path of an inflating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any other...
  • Page 84 Frontal airbags may inflate at different crash speeds. For example: • If the vehicle hits a stationary object, the airbags could inflate at a different crash speed than if the vehicle hits a moving object. • If the vehicle hits an object that deforms, the airbags could inflate at a different crash speed than if the vehicle hits an object that does not deform.
  • Page 85: What Makes An Airbag Inflate

    What Makes an Airbag Inflate? In an impact of sufficient severity, the airbag sensing system detects that the vehicle is in a crash. The sensing system triggers a release of gas from the inflator, which inflates the airbag. The inflator, the airbag and related hardware are all part of the airbag modules.
  • Page 86: What Will You See After An Airbag Inflates

    What Will You See After an Airbag Inflates? After the airbag inflates, it quickly deflates, so quickly that some people may not even realize the airbag inflated. Some components of the airbag module may be hot for a short time. These components include the steering wheel hub for the driver’s frontal airbag and the instrument panel for the right front passenger’s frontal airbag.
  • Page 87: Passenger Sensing System

    • Your vehicle is equipped with a crash sensing and diagnostic module which records information after a crash. See Vehicle Data Collection and Event Data Recorders on page 7-9. • Let only qualified technicians work on your airbag system. Improper service can mean that an airbag system will not work properly.
  • Page 88 The passenger sensing system works with sensors that are part of the right front passenger’s seat and safety belt. The sensors are designed to detect the presence of a properly-seated occupant and determine if the passenger’s frontal airbag should be enabled (may inflate) or not.
  • Page 89 The passenger sensing system is designed to turn off the right front passenger’s frontal airbag if: • the right front passenger seat is unoccupied • the system determines that an infant is present in a rear-facing infant seat • the system determines that a small child is present in a forward-facing child restraint •...
  • Page 90 If a person of adult-size is sitting in the right front passenger’s seat, but the off indicator is lit, it could be because that person is not sitting properly in the seat. If this happens, turn the vehicle off and ask the person to place the seatback in the fully upright position, then sit upright in the seat, centered on the seat cushion, with the person’s legs comfortably extended.
  • Page 91: Servicing Your Airbag-Equipped Vehicle

    Aftermarket equipment, such as seat covers, can affect how well the passenger sensing system operates. You may want to consider not using seat covers or other aftermarket equipment if your vehicle has the passenger sensing system. See Adding Equipment to Your Airbag-Equipped Vehicle on page 1-86 for more information about modifications that can affect how the system operates.
  • Page 92: Adding Equipment To Your Airbag-Equipped Vehicle

    Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to the front or sides of the vehicle that could keep the airbags from working properly? Yes. If you add things that change your vehicle’s frame, bumper system, front end or side sheet metal or height, they may keep the airbag system from working properly.
  • Page 93: Restraint System Check

    Restraint System Check Checking the Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
  • Page 94: Replacing Restraint System Parts After A Crash

    Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary replacements made as soon as possible.
  • Page 95: Features And Controls

    Section 2 Keys ...2-3 Remote Keyless Entry System ...2-4 Remote Keyless Entry System Operation ...2-5 Doors and Locks ...2-8 Door Locks ...2-8 Power Door Locks ...2-9 Delayed Locking ...2-9 Programmable Automatic Door Locks ...2-10 Rear Door Security Locks ...2-10 Lockout Protection ...2-11 Liftgate ...2-11 Windows ...2-13 Power Windows ...2-14...
  • Page 96 Section 2 ® OnStar System ...2-32 Universal Home Remote System ...2-34 Universal Home Remote System Operation ...2-35 Storage Areas ...2-38 Glove Box ...2-38 Cupholder(s) ...2-38 Cell Phone Storage Area ...2-39 Overhead Console ...2-39 Floor Console Storage Area ...2-39 Features and Controls Front Armrest Storage Area ...2-39 Rear Storage Area ...2-40 Roof Rack System ...2-40...
  • Page 97: Keys

    Keys CAUTION: Leaving children in a vehicle with the ignition key is dangerous for many reasons. They could operate the power windows or other controls or even make the vehicle move. The children or others could be badly injured or even killed. Do not leave the keys in a vehicle with children.
  • Page 98: Remote Keyless Entry System

    ® Your vehicle has the PASS-Key system. The key has a transponder in the key head that matches a decoder in the vehicle’s steering column. If a replacement key or any additional key is needed, you must purchase this key from your dealer. The ®...
  • Page 99: Remote Keyless Entry System Operation

    At times you may notice a decrease in range. This is normal for any remote keyless entry system. If the transmitter does not work or if you have to stand closer to your vehicle for the transmitter to work, try this: •...
  • Page 100: Matching Transmitter(S) To Your Vehicle

    If you would like to program the way the headlamps and parking lamps operate with remote unlock confirmation, and your vehicle is equipped with the Driver Information Center (DIC), see DIC Vehicle Personalization on page 3-64. LOCK: To lock all doors, press LOCK. The LOCK button on the remote keyless entry transmitter will arm the content theft-deterrent system.
  • Page 101: Battery Replacement

    Battery Replacement Under normal use, the battery in your remote keyless entry transmitter should last about three years. United States You can tell the battery is weak if the KEY FOB BATTERY LOW message appears in the message center. If you get this message, the battery in the key fob needs to be replaced.
  • Page 102: Doors And Locks

    Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. • Passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked, the handle will not open it. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.
  • Page 103: Power Door Locks

    Power Door Locks The power door lock switch is located on the driver’s and front passenger’s doors next to the door handle. Press the front of the switch to lock all doors, or press the back of the switch to unlock all doors. The rear doors do not have power door lock switches.
  • Page 104: Programmable Automatic Door Locks

    Programmable Automatic Door Locks All of the doors will automatically lock when all doors are closed, the engine is running and the shift lever is shifted out of PARK (P). All of the doors will automatically unlock when the shift lever is shifted into PARK (P).
  • Page 105: Canceling The Rear Door Security Locks

    Canceling the Rear Door Security Locks 1. Unlock and open the rear door from the outside. 2. Push the lever down to disengage the safety lock. 3. Close the door. 4. Repeat Steps 1 through 3 for the other rear door lock.
  • Page 106: Liftgate Release

    Liftgate Release Liftgate Handle Your vehicle is equipped with a liftgate release touchpad, located on the inner side of the liftgate handle. 2-12 To open the liftgate using the touchpad, do the following: 1. Put the vehicle in PARK (P). 2.
  • Page 107: Windows

    Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
  • Page 108: Power Windows

    Power Windows Switches on the driver’s door armrest control each of the windows when the ignition is in ON, ACCESSORY, or when Retained Accessory Power (RAP) is active. See Retained Accessory Power (RAP) on page 2-20 for more information. In addition, each passenger’s door has a window switch.
  • Page 109: Sun Visors

    Sun Visors To block out glare you can swing down the visors. You can also remove them from the center mount and swing them to the side. There may be an extension on the inboard side of the sun visors. Pull the extension out to block out glare.
  • Page 110: Arming With The Power Lock Switch

    Once armed, the alarm will go off if someone tries to enter the vehicle without using the optional remote keyless entry transmitter or the key, or tries to turn the ignition on without using the correct key. The horn will sound and the headlamps and parking lamps will flash any time the alarm sounds.
  • Page 111: Disarming With Your Key

    Disarming with Your Key Your alarm system will disarm when you use your key to unlock the driver’s door. The security light will stop flashing to let you know the system is no longer armed. Disarming with the Remote Keyless Entry Transmitter Your alarm system will disarm when you press UNLOCK on your remote keyless entry transmitter to unlock the...
  • Page 112: Pass-Key ® Iii

    ® PASS-Key III Operation Your vehicle is equipped with the PASS-Key (Personalized Automotive Security System) theft-deterrent system. PASS-Key theft deterrent system. This means you do not have to do anything different to arm or disarm the system. It works when you insert or remove the key from the ignition.
  • Page 113: Starting And Operating Your Vehicle

    ® To program the new PK3 key do the following: 1. Verify the new key has PK3 stamped on it. 2. Insert the original key in the ignition and start the engine. If the engine will not start, see your GM dealer for service.
  • Page 114: Ignition Positions

    Ignition Positions With the key in the ignition, you can turn it to four different positions. A (OFF): This is the only position in which you can remove the key. This position locks the ignition and transaxle. Notice: Using a tool to force the key from the ignition switch could cause damage or break the key.
  • Page 115: Starting The Engine

    Starting the Engine Move your shift lever to PARK (P) or NEUTRAL (N). Your engine will not start in any other position — that is a safety feature. To restart when you are already moving, use NEUTRAL (N) only. Notice: Shifting into PARK (P) with the vehicle moving could damage the transaxle.
  • Page 116: To Use The Engine Coolant Heater

    Engine Coolant Heater Your vehicle may be equipped with an engine coolant heater. In very cold weather, 0°F ( 18°C) or colder, the engine coolant heater can help. You will get easier starting and better fuel economy during engine warm-up. Usually, the coolant heater should be plugged in a minimum of four hours prior to starting your vehicle.
  • Page 117: Automatic Transaxle Operation

    Automatic Transaxle Operation Maximum engine speed is limited when you are in PARK (P) or NEUTRAL (N), to protect driveline components from improper operation. There are several different positions for your shift lever. PARK (P): This gear position locks your front wheels. It is the best position to use when you start your engine because your vehicle cannot move easily.
  • Page 118 REVERSE (R): Use this gear to back up. Notice: Shifting to REVERSE (R) while your vehicle is moving forward could damage the transaxle. The repairs would not be covered by your warranty. Shift to REVERSE (R) only after your vehicle is stopped.
  • Page 119: Warm-Up Shift

    Warm-Up Shift Your vehicle has a computer controlled transaxle designed to warm up the engine faster when the outside temperature is 35°F (2°C) or colder. You may notice that the transaxle will shift at a higher vehicle speed until the engine is warmed up. This is a normal condition designed to provide heat to the passenger compartment and defrost the windows more quickly.
  • Page 120: Parking Brake

    Parking Brake The parking brake is located under the instrument panel on the driver’s side of the vehicle. To set the parking brake, hold the regular brake pedal down with your right foot and push down on the parking brake pedal with your left foot. 2-26 If the ignition is on, the brake system warning light will come on.
  • Page 121: Shifting Into Park (P)

    Shifting Into Park (P) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake firmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
  • Page 122: Torque Lock

    Torque Lock If you are parking on a hill and you do not shift your vehicle into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transaxle. You may find it difficult to pull the shift lever out of PARK (P).
  • Page 123: Parking Over Things That Burn

    Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn. Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell.
  • Page 124: Running The Engine While Parked

    Running the Engine While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle.
  • Page 125: Mirrors

    Mirrors Manual Rearview Mirror The vehicle may have a rearview mirror that can be adjusted for day or night driving. Push or pull the tab at the bottom of the mirror to adjust it for day or night conditions. The mirror’s two outer buttons operate the lamps on the bottom of the mirror.
  • Page 126: Outside Convex Mirror

    Outside Convex Mirror CAUTION: A convex mirror can make things (like other vehicles) look farther away than they really are. If you cut too sharply into the right lane, you could hit a vehicle on your right. Check your inside mirror or glance over your shoulder before changing lanes.
  • Page 127 Terms and conditions of the Subscription Service Agreement can be found at www.onstar.com or www.onstar.ca. ® OnStar Services For new vehicles equipped with OnStar Sound Plan is included for one year from the date of purchase. You can extend this plan beyond the first year, or upgrade to the Directions and Connections Plan to meet your needs.
  • Page 128: Universal Home Remote System

    Universal Home Remote System The Universal Home Remote System, a combined universal transmitter and receiver, provides a way to replace up to three hand held transmitters used to activate devices such as gate operators, garage door openers, entry door locks, security systems, and home lighting.
  • Page 129: Universal Home Remote System Operation

    Universal Home Remote System Operation Do not use the Universal Home Remote with any garage door opener that does not have the “stop and reverse” feature. This includes any garage door opener model manufactured before April 1, 1982. If you have a newer garage door opener with rolling codes, please be sure to follow Steps 6 through 8 to complete the programming of your Universal Home Remote...
  • Page 130 4. The indicator light will flash slowly at first and then rapidly after Universal Home Remote successfully receives the frequency signal from the hand-held transmitter. Release both buttons. 5. Press and hold the newly-trained Universal Home Remote button and observe the indicator light. If the indicator light stays on constantly, programming is complete and your device should activate when the Universal Home Remote button...
  • Page 131: Gate Operator And Canadian Programming

    Gate Operator and Canadian Programming Canadian radio-frequency laws require transmitter signals to time out or quit after several seconds of transmission. This may not be long enough for Universal Home Remote to pick up the signal during programming. Similarly, some U.S. gate operators are manufactured to time out in the same manner.
  • Page 132: Storage Areas

    Reprogramming a Single Universal Home Remote Button To program a device to Universal Home Remote using a Universal Home Remote button previously trained, follow these steps: 1. Press and hold the desired Universal Home Remote button. Do not release the button. 2.
  • Page 133: Cell Phone Storage Area

    Cell Phone Storage Area Your vehicle has a cell phone storage compartment located on the floor console storage closest to the driver’s seat. Lift the lid to use the storage compartment. The compartment has an accessory power outlet for charging the cell phone. Overhead Console If your vehicle has an overhead console, it may contain a storage compartment, a sunglasses storage...
  • Page 134: Rear Storage Area

    Rear Storage Area There are four small storage compartments in the rear of your vehicle. One is on the passenger’s side, two are on the driver’s side and one is on the floor by the tailgate. To remove the covers, lift up on the tabs. If your vehicle has the 10-speaker system, the compartment on the passenger’s side and the long compartment on the driver’s side will be equipped with speakers.
  • Page 135 Notice: Loading cargo on the luggage carrier that weighs more than 220 lbs (100 kg) or hangs over the rear or sides of the vehicle may damage your vehicle. Load cargo so that it rests on the slats as far forward as possible and against the side rails, making sure to fasten it securely.
  • Page 136 To adjust the crossrail(s), the sunroof stop (A), if equipped, must be removed. To remove the sunroof stop, do the following: 1. Find the tool (B) located in a bag in the glove box labeled TOOL KIT-ACSRY. 2. Use the tool to remove the screw located in the side rail assembly in front of the front crossrail.
  • Page 137: Convenience Net

    Convenience Net Your vehicle may have a convenience net. The convenience net is designed to help keep small loads, like grocery bags, from falling over. Install the convenience net at the rear of your vehicle, just inside the liftgate/tailgate opening. Attach both the upper and lower hooks to the loops on either side of the liftgate opening.
  • Page 138 Removing the Extended Rear Convenience Center 1. Make sure that all items have been removed from the top and the inside of the rear convenience center. 2. Remove the carpeted mat from the vehicle. 3. Lift the handle(s) on the top of the lid to open the rear storage bin.
  • Page 139 5. Lift the rear bin into the back of the vehicle. Place the rear bin over the center T-shaped wall on the forward bin. Push down to secure. Align the rear bin over the rear mounting bolts. 6. Put the nuts back onto the mounting bolts and tighten.
  • Page 140: Sunroof

    Reinstalling the Rear Convenience Center on Vehicles with the Third Row Stowable Seat 1. Make sure that all items have been removed from the rear of the vehicle. 2. Lift the bin into the back of the vehicle. Align the bin over the rear mounting bolts.
  • Page 141: Vehicle Personalization

    Notice: Opening the sunroof when the luggage rack crossrails are not in the full-rear position could cause damage to the sunroof or luggage rack. Verify the luggage rack crossrails are in the full-rear position before opening the sunroof. Press the rear of the switch to open the sunroof to the vent position.
  • Page 142 To store the memory settings, do the following: 1. Adjust the driver’s seat and the outside rearview mirrors to the position you would like for driving. 2. Press and hold memory button 1 for more than three seconds. A double beep will sound when the memory seat and mirror position have been stored.
  • Page 143 Section 3 Instrument Panel Overview ...3-4 Hazard Warning Flashers ...3-6 Other Warning Devices ...3-6 Horn ...3-6 Tilt Wheel ...3-6 Turn Signal/Multifunction Lever ...3-7 Turn and Lane-Change Signals ...3-7 Headlamp High/Low-Beam Changer ...3-8 Flash-to-Pass ...3-8 Windshield Wipers ...3-9 Windshield Washer ...3-9 Rear Window Wiper/Washer ...3-10 Cruise Control ...3-10 Exterior Lamps ...3-14...
  • Page 144 Section 3 Message Center ...3-51 Passenger Seatbelt Reminder Message ...3-51 Service Traction System Warning Message ...3-51 Traction Active Message ...3-52 Engine Coolant Temperature Warning Message ...3-52 Charging System Indicator Message ...3-53 Reduced Engine Power Message ...3-53 Low Oil Pressure Message ...3-54 Change Engine Oil Message ...3-55 Door Ajar Warning Message ...3-55 Rear Hatch Ajar Warning Message ...3-55...
  • Page 145 NOTES...
  • Page 146: Instrument Panel Overview

    Instrument Panel Overview...
  • Page 147 The main components of the instrument panel are the following: A. Exterior/Interior Lamps Control. See Exterior Lamps on page 3-14 and Interior Lamps on page 3-16. B. Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 3-7. C. Hazard Warning Flasher Button. See Hazard Warning Flashers on page 3-6.
  • Page 148: Hazard Warning Flashers

    Hazard Warning Flashers Your hazard warning flashers let you warn others. They also let police know you have a problem. Your front and rear turn signal lamps will flash on and off. The hazard warning flasher button is located on top of the steering column.
  • Page 149: Turn Signal/Multifunction Lever

    Turn Signal/Multifunction Lever The lever on the left side of the steering column includes the following: • Turn and Lane-Change Signals. See Turn and Lane-Change Signals on page 3-7. • Headlamp High/Low-Beam Changer. See Headlamp High/Low-Beam Changer on page 3-8. •...
  • Page 150: Turn Signal On Chime

    If a bulb is burned out, replace it to help avoid an accident. If the arrows do not go on at all when you signal a turn, check for burned-out bulbs and check the fuse. See Fuses and Circuit Breakers on page 5-101. If you have a trailer towing option with added wiring for the trailer lamps, the signal indicator will flash at a normal rate even if a turn signal bulb is burned out.
  • Page 151: Windshield Wipers

    Windshield Wipers WIPER : Turn the band marked WIPER to control the windshield wipers. MIST: For a single wiping cycle, turn the band to MIST. Hold it there until the wipers start, then let go. The wipers will stop after one cycle. If you want more cycles, hold the band on MIST longer.
  • Page 152: Rear Window Wiper/Washer

    Rear Window Wiper/Washer The rear window washer/wiper switch is located in the instrument panel switchbank. See Instrument Panel Switchbank on page 3-20. (Rear Intermittent Wiper) Press the wiper symbol on the top of the switch to turn on the intermittent wiper.
  • Page 153 The cruise controls are located on the end of the turn signal/multifunction lever. ON: Move the switch to this position to turn the cruise control system on. R/A: Move the switch to this position to resume a set speed or to accelerate. SET: Press this button, located at the end of the lever, to set a speed.
  • Page 154: Setting Cruise Control

    Setting Cruise Control CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control.
  • Page 155 Reducing Speed While Using Cruise Control There are two ways to reduce speed while using cruise control: • Press the SET button at the end of the lever until you reach the lower speed you want, then release it. • To slow down in very small amounts, press the SET button briefly.
  • Page 156: Exterior Lamps

    Exterior Lamps The control on the left side of the steering column operates the exterior lamps. The exterior lamp control has three positions: AUTO (Automatic Headlamp Control/Off): Turning the control to this position will activate the automatic headlamps when it is dark enough outside and turn off all lamps and lights during the day except for the Daytime Running Lamps (DRL).
  • Page 157: Automatic Headlamp System

    When the DRL are on, only your reduced intensity high-beam headlamps will be on. Your instrument panel will not be lit up. When it is dark enough outside, the exterior lamps will come on automatically. When it is bright enough outside, the exterior lamps will go out and the DRL will turn on.
  • Page 158: Interior Lamps

    Interior Lamps The interior lamps can be controlled, or automatically turn on or off under certain conditions. They are explained in the following text. Instrument Panel Brightness This feature controls the brightness of the instrument panel lights. The knob for this feature is located on the interior lamps control.
  • Page 159: Headlamp Exit Delay

    Headlamp Exit Delay If your vehicle has headlamp exit delay, it will keep the headlamps and parking lamps on at night for 30 seconds if the following conditions are met: • The ignition is turned to OFF. • The exterior lamp control is in the AUTO position. •...
  • Page 160: Delayed Lighting

    Delayed Lighting If your vehicle has delayed lighting, it will continue to illuminate the interior for 25 seconds after all doors have been closed. The lamps will continue to illuminate when the following conditions are met: • A door is opened then closed. •...
  • Page 161: Perimeter Lighting

    Perimeter Lighting If your vehicle has perimeter lighting, it will turn on the headlamps and parking lamps for 25 seconds when the following conditions are met: • The ignition is turned to OFF. • The exterior lamp control is in the AUTO position. •...
  • Page 162: Battery Run-Down Protection

    Battery Run-Down Protection Your vehicle has a feature to help prevent you from draining the battery, in case you accidentally leave the interior or exterior lamps on. If the interior lamps are left on while the ignition is in OFF, they will automatically turn off after 10 minutes.
  • Page 163: Head-Up Display (Hud)

    Head-Up Display (HUD) CAUTION: If the HUD image is too bright, or too high in your field of view, it may take you more time to see things you need to see when it is dark outside. Be sure to keep the HUD image dim and placed low in your field of view.
  • Page 164 Under warning conditions, the CHECK GAGES message will illuminate in the HUD. Look at the instrument panel cluster for more information. Notice: If you try to use the HUD image as a parking aid, you may misjudge the distance and damage your vehicle.
  • Page 165 HUD image harder to see. When you first start the vehicle the display will show BUICK and the Buick logo for a few seconds. If it is cold outside, this display may stay on for up to a minute. Clean the inside of the windshield as needed to remove any dirt or film that reduces the sharpness or clarity...
  • Page 166: Ultrasonic Rear Parking Assist (Urpa)

    Ultrasonic Rear Parking Assist (URPA) The Ultrasonic Rear Parking Assist (URPA) system is designed to help you park, while the vehicle is in REVERSE (R). It operates only at very low speeds, less than 3 mph (5 km/h). URPA can help make parking easier and to help you avoid colliding with objects such as parked vehicles.
  • Page 167: How The System Works

    URPA can be turned off by pressing the rear park aid disable switch located in the instrument panel switchbank. When the system is disabled, an indicator light will glow on the switch. You will not see any lights on the rear display if the switch is in the off position.
  • Page 168: Accessory Power Outlet(S)

    When the System Does Not Seem to Work Properly The light may flash red when the vehicle is in REVERSE (R) if the ultrasonic sensors are not kept clean. So be sure to keep your rear bumper free of mud, dirt, snow, ice, and slush.
  • Page 169: Ashtray(S) And Cigarette Lighter

    Certain electrical accessories may not be compatible with the accessory power outlet and could result in blown vehicle or adapter fuses. If you experience a problem, see your dealer for additional information on the accessory power outlets. Notice: Adding any electrical equipment to your vehicle may damage it or keep other components from working as they should.
  • Page 170: Climate Controls

    Climate Controls Climate Control System With this system you can control the heating, cooling, and ventilation for your vehicle. Operation Turn the right knob clockwise or counterclockwise to direct the airflow inside your vehicle. To change the current mode, select one of the following: (Vent): This mode directs air to the instrument panel outlets.
  • Page 171: Defogging And Defrosting

    Temperature Control: Turn the center knob clockwise or counterclockwise to increase or decrease the air temperature inside your vehicle. A/C (Air Conditioning): Press this button to turn the air-conditioning system on or off. When A/C is pressed, an indicator light in the button will come on to let you know that air conditioning is activated.
  • Page 172: Rear Window Defogger

    Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. < REAR: Press this button to turn the rear window defogger on or off. An indicator light in the button will come on to let you know that the rear window defogger is activated.
  • Page 173 (Bi-Level): This mode directs half of the air to the instrument panel outlets, then directs the remaining air to the floor outlets. Cooler air is directed to the upper outlets and warmer air to the floor outlets. (Floor): This mode directs most of the air to the floor outlets.
  • Page 174 Defogging and Defrosting Fog on the inside of windows is a result of high humidity, or moisture, condensing on the cool window glass. This can be minimized if the climate controls system is used properly. There are two modes to clear fog or frost from your windshield.
  • Page 175: Dual Automatic Climate Control System

    Dual Automatic Climate Control System Your vehicle may have the dual automatic climate control system. With this system you can control the heating, cooling, and ventilation for your vehicle. Automatic Operation AUTO (Automatic): When the driver’s temperature knob is pressed to select AUTO and the temperature is set, the system will automatically control the inside temperature, the air delivery and the fan speed.
  • Page 176: Manual Operation

    Manual Operation MODE: Press this button to manually change the direction of airflow in your vehicle; keep pressing the button until the desired mode appears on the display. To change the current mode, select one of the following: (Vent): This mode directs air to the instrument panel outlets.
  • Page 177 Temperature Control: Use the DRIVER knob to increase or decrease the air temperature inside your vehicle. If the front passenger would like the temperature to be warmer or cooler, use the PASS knob to adjust the passenger’s temperature. Air Conditioning: The air-conditioning compressor will automatically come on when a temperature cooler than the interior temperature is chosen using the temperature knobs.
  • Page 178: Outlet Adjustment

    Rear Window Defogger The rear window defogger uses a warming grid to remove fog from the rear window. < REAR: Press this button to turn the rear window defogger on or off. An indicator light in the button will come on to let you know that the rear window defogger is activated.
  • Page 179: Warning Lights, Gages, And Indicators

    Warning Lights, Gages, and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
  • Page 180: Instrument Panel Cluster

    Instrument Panel Cluster Your instrument panel cluster is designed to let you know at a glance how your vehicle is running. You’ll know how fast you’re going, how much fuel you’re using, and many other things you’ll need to drive safely and economically. The indicator warning lights and gages are explained on the following pages.
  • Page 181: Speedometer And Odometer

    Speedometer and Odometer Your speedometer lets you see your speed in both miles per hour (mph) and kilometers per hour (km/h). Your odometer shows how far your vehicle has been driven, in either miles (used in the United States) or kilometers (used in Canada). However, a Canadian odometer will remain in metric units only.
  • Page 182: Retro-Active Reset

    Retro-Active Reset The trip odometer has a feature called retro-active reset. This feature can be used to set the trip odometer to the number of miles or kilometers driven since the ignition was last turned on. This can be used if you forget to reset your trip odometer at the beginning of a trip.
  • Page 183: Airbag Readiness Light

    Airbag Readiness Light There is an airbag readiness light on the instrument panel, which shows the airbag symbol. The system checks the airbag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the airbag sensor, the airbag modules, the wiring, diagnostic module, and safety belt pretensioners.
  • Page 184: Passenger Airbag Status Indicator

    Passenger Airbag Status Indicator Your vehicle has the passenger sensing system. Your rearview mirror has a passenger airbag status indicator. Passenger Airbag Status Indicator – United States Passenger Airbag Status Indicator – Canada When the ignition key is turned to ON or START, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check.
  • Page 185 CAUTION: Even though the passenger sensing system is designed to turn off the passenger’s frontal airbag if the system detects a rear-facing child restraint, no system is failsafe, and no one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off.
  • Page 186: Brake System Warning Light

    Brake System Warning Light When the ignition is on, the brake system warning light will come on when you set your parking brake. The light will stay on if your parking brake doesn’t release fully. If it stays on after your parking brake is fully released, it means you have a brake problem.
  • Page 187: Anti-Lock Brake System Warning Light

    Anti-Lock Brake System Warning Light United States Your vehicle may have an anti-lock brake system warning light. If it does, the light should come on for a few seconds when you turn the ignition key to ON. If the anti-lock brake system warning light stays on longer than normal after you’ve started your engine, turn the ignition off.
  • Page 188: Engine Coolant Temperature Gage

    Engine Coolant Temperature Gage United States This gage shows the engine coolant temperature. If the gage pointer moves near the “H”, your engine is too hot! It means that your engine coolant has overheated. If you have been operating your vehicle under normal driving conditions, you should pull off the road, stop your vehicle and turn off the engine as soon as possible.
  • Page 189 This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. The SERVICE ENGINE SOON or check engine light comes on to indicate that there is a problem and service is required.
  • Page 190: If The Light Is Flashing

    If the Light Is Flashing The following may prevent more serious damage to your vehicle: • Reducing vehicle speed • Avoiding hard accelerations • Avoiding steep uphill grades • If you are towing a trailer, reduce the amount of cargo being hauled as soon as it is possible If the light stops flashing and remains on steady, see “If the Light Is On Steady”...
  • Page 191: Emissions Inspection And Maintenance Programs

    Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel. See Gasoline Octane on page 5-5. Poor fuel quality will cause your engine not to run as efficiently as designed. You may notice this as stalling after start-up, stalling when you put the vehicle into gear, misfiring, hesitation on acceleration, or stumbling on acceleration.
  • Page 192: Fuel Gage

    Fuel Gage United States When the indicator nears empty, you still have a little fuel left, but you should get more soon. If your fuel is low, the warning message in the message center will come on. See Low Fuel Warning Message on page 3-57.
  • Page 193: Message Center

    Message Center The message center is located at the top of the instrument panel cluster in between the tachometer and speedometer. It gives you important safety and maintenance facts. Passenger Seatbelt Reminder Message If your vehicle is equipped with the passenger sensing system, this message reminds the passenger to buckle...
  • Page 194: Traction Active Message

    Traction Active Message United States If your vehicle has the traction control system, the TRACTION ACTIVE message will appear when the traction control system is limiting wheel spin. You may feel or hear the system working, but this is normal. Slippery road conditions may exist if this message appears, so adjust your driving accordingly.
  • Page 195: Charging System Indicator Message

    Charging System Indicator Message The charging system battery symbol will come on in the message center when you turn on the ignition as a check to show you it is working. It will remain on as long as the engine is not running. It should go out once the engine is running.
  • Page 196: Low Oil Pressure Message

    Low Oil Pressure Message United States Your vehicle may be equipped with a low oil pressure warning message. Your oil pressure message lets you know when you may have a problem with your engine oil pressure. When the engine is running and this message appears, the engine oil level may be too low.
  • Page 197: Change Engine Oil Message

    Change Engine Oil Message United States When this message comes on and stays on after you have started the engine, it means that service is required for your vehicle. See Scheduled Maintenance on page 6-4 and Engine Oil on page 5-13 for more information.
  • Page 198: Check Gas Cap Message

    Check Gas Cap Message If your vehicle is equipped with this message, it will come on when the ignition is turned to ON or START and the gas cap is open. ® PASS-Key III Security Message United States If you are ever driving and this message comes on and stays on, you will be able to restart your engine if you turn it off.
  • Page 199: Low Washer Fluid Warning Message

    Low Washer Fluid Warning Message United States Your vehicle may have a low washer fluid warning message. If your washer fluid is low, this warning message will come on and stay on until you add washer fluid. See Windshield Washer Fluid on page 5-33 for adding washer fluid instructions.
  • Page 200: Low Brake Fluid Warning Message

    Low Brake Fluid Warning Message United States If your brake fluid is low, the warning message will come on and stay on until you add brake fluid. The brake system warning light will also be illuminated. If this message appears, the brakes need attention. You should have your vehicle serviced immediately.
  • Page 201: Program Mode Message

    Program Mode Message United States If you receive this message, your vehicle is in program mode. If your vehicle is equipped with the Driver Information Center (DIC), you are ready to begin programming your vehicle’s customization features. See DIC Vehicle Personalization on page 3-64 for more information.
  • Page 202: Parking Lamp Warning Message

    Parking Lamp Warning Message United States If this message appears, one or both of the vehicle’s parking lamp bulbs needs replacement. See Bulb Replacement on page 5-44 for bulb replacement instructions. Highbeam Out Warning Message United States If this message appears, one or both of the vehicle’s high-beam headlamp bulbs needs replacement.
  • Page 203: Compass Calibration

    Compass Calibration If the calibration required symbol, or C, appears in the compass, you must manually put the compass into the calibration mode. To enter this mode, do the following: 1. Turn the ignition on and press the MODE button until CALIBRATE COMPASS displays.
  • Page 204: Dic Controls And Displays

    When the ignition is turned to ON or START, the DIC will display the following: BUICK: BUICK will be displayed for three seconds. DRIVER #: This message will be displayed for another three seconds after BUICK appears in the display.
  • Page 205 FUEL RANGE: The fuel range is an estimated distance that your vehicle can travel on the remaining fuel. The fuel economy used to calculate the range is based on your driving history since the last reset of the average speed. FUEL USED: The fuel used display will show you how much fuel has been used since the last time it was reset.
  • Page 206: Dic Vehicle Personalization

    DIC Vehicle Personalization The DIC is used to program the choices of two drivers. The drivers are recognized as DRIVER 1 or DRIVER 2 in the DIC display. You will let the DIC know which driver you are by using your remote keyless entry transmitter. Each remote keyless entry transmitter was pre-programmed to belong to DRIVER 1 or DRIVER 2.
  • Page 207 United States 4. The program mode message will appear in the message center as an indication that your vehicle is ready to begin programming. 5. Follow the instructions given by the DIC. Headlamp Exit Delay This feature allows you to customize the headlamps and parking lamps.
  • Page 208: Interior Lighting Delay

    Interior Lighting Delay The interior lighting delay feature can be programmed to one of the following modes: OFF: This feature will not illuminate the interior of your vehicle when all of the doors are closed. ON: This feature will continue to illuminate the interior lamps for 25 seconds after all doors have been closed so that you can find your ignition and buckle your safety belt at night.
  • Page 209: Interior Lighting On

    Interior Lighting On The interior lighting on feature can be programmed to one of the following modes: KEY OUT: The interior lamps will come on for about 25 seconds whenever you remove the key from the ignition. DOOR: The interior lamps will come on for about 25 seconds when any door is opened.
  • Page 210: Auto Door Lock/Unlock

    Auto Door Lock/Unlock The doors will automatically lock when the vehicle is shifted out of PARK (P). For automatic unlocking, you can program your vehicle to one of the following modes: OFF: When the shift lever is put in PARK (P), your doors will not unlock automatically.
  • Page 211: Delayed Locking

    Delayed Locking The delayed locking feature can be programmed to one of the following modes: ON: Lock your vehicle using the power door lock switch or the remote keyless entry transmitter while any door is opened, you will hear three chimes and the doors will not lock.
  • Page 212: Remote Door Unlock

    Remote Door Unlock The remote door unlock feature can be programmed to one of the following modes: DRIVER/ALL: With the first press of UNLOCK on the remote keyless entry transmitter, the driver’s door will unlock, and with the second press of UNLOCK, within five seconds of the first press, all passenger’s doors will unlock.
  • Page 213: Lock Feedback

    Your vehicle was originally programmed to LIGHTS. The mode may have been changed since then. To determine the current mode, or to change the mode, do the following: 1. Follow the instructions for “Entering Programming Mode” listed previously. 2. Follow the instructions for programming HEADLMP EXIT DELAY earlier in this section, to make sure which mode it is programmed to.
  • Page 214: Seat Recall

    Seat Recall The seat recall feature can be programmed to one of the following modes: ON: The previously programmed memory seat position will be recalled when the UNLOCK button is pressed on the remote keyless entry transmitter. OFF: No memory seat position will be recalled when you press the UNLOCK button on the remote keyless entry transmitter.
  • Page 215: Exiting Programming Mode

    Tilt Mirror The tilt mirror feature can be programmed to one of the following modes: ON: The passenger’s side outside rearview mirror will tilt down towards the curb when the vehicle is shifted to REVERSE (R) and returns to its previous position when the vehicle is shifted out of REVERSE (R).
  • Page 216: Audio System(S)

    Audio System(s) Driving without distraction is a necessity for a safer driving experience. See Defensive Driving on page 4-3. By taking a few moments to read this manual and get familiar with your vehicle’s audio system, you can use it with less effort, as well as take advantage of its features.
  • Page 217: Setting The Time

    Added sound equipment may interfere with the operation of your vehicle’s engine, radio, or other systems, and even damage them. Your vehicle’s systems may interfere with the operation of sound equipment that has been added. Notice: The chime signals related to seat belts, parking brake, and other functions of your vehicle operate through the GM radio/entertainment system.
  • Page 218: Radio With Cd

    Radio with CD Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, your radio can do the following: • Seek to stations broadcasting the selected type of programming •...
  • Page 219: Playing The Radio

    Playing the Radio PWR (Power): Push this knob to turn the system on and off. VOL (Volume): Turn this knob to increase or to decrease the volume. SCV (Speed-Compensated Volume): With SCV, your audio system adjusts automatically to make up for road and wind noise as you drive.
  • Page 220: Setting Preset Stations

    Finding a Station BAND: Press this button to switch between FM1, FM2, or AM, or XM1 or XM2 (if equipped). The display will show the selection. TUNE: Turn this knob to select radio stations. © ¨ SEEK : Press the right or the left arrow to go to the next or to the previous station and stay there.
  • Page 221: Setting The Tone (Bass/Treble)

    Setting the Tone (Bass/Treble) AUDIO: Push and release this knob until BASS, MID, or TREBLE appears on the display. Then turn the AUDIO knob to increase or to decrease. If a station is weak or noisy, decrease the treble. To adjust bass, midrange, or treble to the middle position, select BASS, MID, or TREBLE.
  • Page 222: Rds And Xm

    Finding a Program Type (PTY) Station (RDS and XM™) To select and find a desired PTY perform the following: 1. Press P-TYP to activate program type select mode. The PTY symbol will appear on the display. 2. Turn the AUDIO knob to select a PTY. 3.
  • Page 223: Rds Messages

    RDS Messages ALERT!: Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! will appear on the display. You will hear the announcement, even if the volume is low or a CD is playing. If a CD is playing, play will stop during the announcement.
  • Page 224: Radio Messages

    Radio Messages CAL (CALIBRATE): The audio system has been calibrated for your vehicle from the factory. If CAL appears on the display it means that the radio has not been configured properly for your vehicle and must be returned to the dealer for service. Radio Display Message XL (Explicit Language...
  • Page 225 Radio Display Message No Info Artist Name/Feature not available No Info Song/Program Title not available No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0)
  • Page 226: Playing A Cd

    Playing a CD Insert a CD partway into the slot, label side up. The player will pull it in and the CD should begin playing. If you want to insert a CD while the ignition or the radio is off, first press the eject or DISP button. When a CD is inserted, the CD symbol will appear on the display.
  • Page 227 4 RDM (Random): Press this pushbutton to hear the tracks in random, rather than sequential, order. Press RDM again to turn off random play. EQ (Equalizer): Press EQ to select an equalization setting while playing a CD. The equalization will be set whenever a CD is played.
  • Page 228: Listening To A Dvd

    CD Messages CHECK CD: If this message appears on the radio display, it could for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. • You are driving on a very rough road. When the road becomes smoother, the CD should play.
  • Page 229: Radio With Cassette And Cd

    Radio with Cassette and CD Radio Data System (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: •...
  • Page 230 Playing the Radio PWR (Power): Push this knob to turn the system on and off. VOL (Volume): Turn this knob to increase or to decrease the volume. DISP (Display): Press this button to switch the display between the radio station frequency and the time. Press this button to display the time when the ignition is turned off.
  • Page 231 Finding a Station BAND: Press this button to switch between FM1, FM2, AM, or XM1 or XM2 (if equipped). The display will show the selection. TUNE: Turn this knob to select radio stations. © ¨ SEEK : Press the right or the left arrow to go to the next or to the previous station and stay there.
  • Page 232 Setting the Tone (Bass/Treble) AUDIO: Push and release AUDIO until BASS, MID, or TREBLE appears on the display. Then turn the AUDIO knob to increase or to decrease. If a station is weak or noisy, decrease the treble. To adjust bass, midrange, or treble to the middle position, select BASS, MID, or TREBLE.
  • Page 233: Finding A Program Type (Pty) Station

    Finding a Program Type (PTY) Station To select and find a desired PTY perform the following: 1. Press P-TYP to activate program type select mode. P-TYPE will appear on the display. 2. Turn the AUDIO knob to select a PTY. 3.
  • Page 234 RDS Messages ALERT!: Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! will appear on the display. You will hear the announcement, even if the volume is low or a cassette tape or CD is playing. If a cassette tape or CD is playing, play will stop during the announcement.
  • Page 235 Radio Messages CAL (Calibrate): The audio system has been calibrated for your vehicle from the factory. If CAL appears on the display, it means that the radio has not been configured properly for the vehicle and must be returned to your GM dealer for service. Radio Display Message XL (Explicit Language...
  • Page 236 Radio Display Message No Info Artist Name/Feature not available No Info Song/Program Title not available No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0)
  • Page 237: Playing A Cassette Tape

    Playing a Cassette Tape The tape player is built to work best with tapes that are up to 30 to 45 minutes long on each side. Tapes longer than that are so thin they may not work well in this player. The longer side with the tape visible should face to the right.
  • Page 238: Cassette Tape Messages

    To scan cassette tape selections, press and hold either SEEK arrow for two seconds until SCN appears on the display and you hear a beep. The tape will go to the next selection, play for a few seconds, then go on to the next selection.
  • Page 239: Cd Adapter Kits

    CD Adapter Kits It is possible to use a portable CD player with the cassette tape player after activating the bypass feature on the tape player. To activate the bypass feature, use the following steps: 1. Turn the ignition on. 2.
  • Page 240 Do not add any label to a CD, it could get caught in the CD player. If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a soft marker instead. Notice: If you add any label to a CD, insert more than one CD into the slot at a time, or attempt to play scratched or damaged CDs, you could...
  • Page 241 To scan tracks, press and hold either SEEK arrow for two seconds until SCAN appears on the display and you will hear a beep. The CD will go to the next track, play for a few seconds, then go on to the next track. The sound will mute and SCAN and the track number will appear on the display while scanning.
  • Page 242: Radio With Six-Disc Cd

    Listening to a DVD Your vehicle may have a Rear Seat Entertainment System, see Rear Seat Entertainment System on page 3-115 for more information. If your vehicle has this system and a DVD is playing, the DVD symbol will appear on the radio display indicating that the DVD is available and can be listened to through your vehicles speakers.
  • Page 243 This system relies upon receiving specific information from these stations and will only work when the information is available. In rare cases, a radio station may broadcast incorrect information that will cause the radio features to work improperly. If this happens, contact the radio station.
  • Page 244 RCL (Recall): Press this knob to switch the display between the radio station frequency and the time. When the ignition is off, press this knob to display the time. For RDS, press the RCL knob to change what appears on the display while using RDS. The display options are station name, RDS station frequency, PTY, and the name of the program (if available).
  • Page 245 Setting Preset Stations Up to 30 stations (six FM1, six FM2, and six AM, six XM1 and six XM2 (if equipped)), can be programmed on the six numbered pushbuttons, by performing the following steps: 1. Turn the radio on. 2. Press BAND to select FM1, FM2, AM, or XM1 or XM2.
  • Page 246 Adjusting the Speakers (Balance/Fade) AUDIO: To adjust the balance between the right and the left speakers, push the AUDIO knob until BAL appears on the display. Turn the knob to move the sound toward the right or the left speakers. To adjust the fade between the front and rear speakers, push and hold the AUDIO knob until FAD appears on the display.
  • Page 247: Setting Preset Ptys (Rds Only)

    To use the PTY interrupt feature, press and hold the P-TYPE button until you hear a beep on the PTY you want to interrupt with. When selected, an asterisk will appear beside that PTY on the display. You may select multiple interrupts if desired.
  • Page 248 RDS Messages ALERT!: Alert warns of local or national emergencies. When an alert announcement comes on the current radio station, ALERT! will appear on the display. You will hear the announcement, even if the volume is low or a CD is playing. If a CD is playing, play will stop during the announcement.
  • Page 249 Radio Messages CAL ERR (Calibration Error): The audio system has been calibrated for your vehicle from the factory. If CAL ERR appears on the display it means that the radio has not been configured properly for the vehicle and it must be returned to the dealer for service.
  • Page 250 Radio Display Message No Info Artist Name/Feature not available No Info Song/Program Title not available No Info Category Name not available No Info No Text/Informational message available Not Found No channel available for the chosen category XM Locked Theft lock active Radio ID Radio ID label (channel 0)
  • Page 251 Playing a CD If the ignition or radio is turned off, with a CD in the player, it will stay in the player. When the ignition or radio is turned on, the CD will start playing where it stopped, if it was the last selected audio source. When a CD is inserted, the CD symbol will appear on the CD.
  • Page 252 To insert multiple CDs, do the following: 1. Turn the ignition on. 2. Press and hold the LOAD button for two seconds. You will hear a beep and the light, located to the right of the slot, will begin to flash. 3.
  • Page 253 Once the player stops and the CD is ejected, remove the CD. After removing the CD, push the PWR knob off and then on again, or wait for the system to reset. This will clear the CD-sensing feature and enable CDs to be loaded into the player again.
  • Page 254: Using Song List Mode

    SCAN : To scan one CD, press and hold either SCAN arrow for more than two seconds until SCAN appears on the display and you hear a beep. Use this feature to listen to 10 seconds of each track of the currently selected CD.
  • Page 255 To play the song list, press the SONG LIST button. One beep will be heard and S-LIST will appear on the display. The recorded tracks will begin to play in the order they were saved. Seek through the song list by using the SEEK SCAN arrows.
  • Page 256: Navigation/Radio System

    CD Messages CHECK CD: If this message appears on the display and/or the CD comes out, it could be for one of the following reasons: • It is very hot. When the temperature returns to normal, the CD should play. •...
  • Page 257: Parental Control

    Rear Seat Entertainment System Your vehicle may have a DVD Rear Seat Entertainment (RSE) system. The RSE system includes a DVD player, a video display screen, two sets of wireless headphones, and a remote control. Parental Control This button is located behind the video screen, next to the auxiliary jacks, near the driver of the vehicle.
  • Page 258 The transmitters are located below the overhead RSE control panel. The headphones will shut off automatically to save the battery power if the DVD system is shut off, or if the headphones are out of range of the transmitters for more than three minutes. If you move too far forward or step out of the vehicle, the headphones will lose the audio signal.
  • Page 259: Stereo Rca Jacks

    Stereo RCA Jacks The RCA jacks are located behind the video screen on the DVD console. The RCA jacks allow audio and video signals to be connected from an auxiliary device such as a camcorder or a video game unit to the RSE.
  • Page 260: Video Screen

    RSE will appear on the radio display when the RSE system is on and RSE OFF, when it is off. To turn the vehicles speakers on and off, press either the CD, the CD TAPE, or the CD AUX button on the radio.
  • Page 261: Dvd Player

    DVD Player The DVD player is located in the overhead console. The DVD player can be controlled by the buttons on the DVD player, and/or by the buttons on the remote control. See “Remote Control” later in this section for more information. The RSE system DVD player is only compatible with DVDs of the appropriate region code for the country that the vehicle was sold in.
  • Page 262: Playing A Disc

    (Main Menu): Press this button to view the media menu. The media menu is different on every DVD. Use the up, down, right, and left arrow buttons to move the cursor around the media menu. After making a selection press enter. This button only operates when using a DVD.
  • Page 263: Remote Control

    If the disc has been ejected or if the stop button has been pressed twice on the remote control or the DVD player faceplate, the disc will resume play at the beginning of the disc. Ejecting a Disc Press the eject button on the DVD player faceplate to eject the disc.
  • Page 264: Remote Control Buttons

    Remote Control Buttons (Power): Press this button to turn the DVD player on and off. (Title): Press this button to go back to the title screen, if there is one. 3-122 (Directional Arrows): Press these buttons to move through DVD menus. The up arrow will skip to the next chapter or track, the down arrow will take you to the beginning of the current chapter or track.
  • Page 265 SRCE (Source): Press this button to switch the system between the DVD player and an auxiliary source. (Stop): Press this button to stop playing, rewinding, or fast forwarding a DVD or CD. Press this button twice to return to the beginning of the DVD. (Prior Chapter/Track): Press this button to go to the beginning of the current chapter or track.
  • Page 266: Setup Menu

    (Subtitles): This button turns on subtitles and moves through subtitle options (English, Spanish, French, etc., if available). Press this button to call up a menu that will operate only when a DVD is being played. The format and content of this function will vary for each disc.
  • Page 267 Battery Replacement To change the remote control batteries, do the following: 1. Unclip the battery door located on the back of the remote control. 2. Replace the two AA batteries in the compartment. Make sure that they are installed correctly, using the diagram on the inside of the battery compartment.
  • Page 268 Problem Recommended Action No sound. The volume on the headphones could be too low. Adjust the volume on the right earpiece on the wireless headphones. If the DVD system is being heard through the vehicle speakers, adjust the volume from the radio. The radio must have the RSE enabled by using the CD, CD TAPE, or...
  • Page 269 Problem Recommended Action After stopping the player, Press the stop button on I push the play button the remote control to but sometimes the DVD resume where the DVD starts where I left off, left off. Press the stop and sometimes at the button twice to start the beginning.
  • Page 270 Problem Recommended Action My disc is stuck in the Press the eject button on player. The eject button the DVD player. Turn the does not work. power off, then on again, then press the eject button on the DVD player. Do not attempt to force or remove the disc from the player.
  • Page 271: Rear Seat Audio (Rsa)

    DVD Messages The following errors may be displayed on the video screen. Disc Format Error: This message will be displayed if a disc is inserted upside down, if the disc is not readable, or if the disc format is not compatible. Disc Play Error: This message will be displayed if the mechanism can not play the disc.
  • Page 272: Primary Radio Controls

    The front seat audio controls always have priority over the RSA controls. If the front seat passengers switch the source for the main radio to a remote source, the RSA will not be able to control the source. You can operate the rear seat audio when the main radio is off.
  • Page 273 This function is inactive if the front seat passengers are listening to a cassette tape. When a CD is playing, press the up arrow to go to the next track on the CD. Press the down arrow to go to the start of the current track if more than eight seconds have played.
  • Page 274: Theft-Deterrent Feature

    Theft-Deterrent Feature ® THEFTLOCK is designed to discourage theft of your vehicle’s radio. It works by using a secret code to disable all radio functions whenever battery power is removed and the radio is placed in a different vehicle. This feature requires no user input to be activated. The radio is automatically armed when it is put into the vehicle for the first time.
  • Page 275: Radio Reception

    MUTE: Press this button to silence the system. Press it again, or any other radio button, to turn the sound on. (Volume): Press the up or down arrow to increase or decrease the volume. SEEK : Press the up or the down arrow to go to the next or to the previous station and stay there.
  • Page 276: Care Of The Cassette Tape Player

    XM™ Satellite Radio Service XM™ Satellite Radio Service gives digital radio reception from coast-to-coast in the 48 contiguous United States, and in Canada (if available). Just as with FM, tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of the XM™...
  • Page 277: Care Of Your Cds And Dvds

    Care of Your CDs and DVDs Handle CDs carefully. Store them in their original cases or other protective cases and away from direct sunlight and dust. The CD player scans the bottom surface of the disc. If the surface of a CD is damaged, such as cracked, broken, or scratched, the CD will not play properly or not at all.
  • Page 278 NOTES 3-136...
  • Page 279: Driving Your Vehicle

    Section 4 Your Driving, the Road, and Your Vehicle ...4-2 Driver Behavior ...4-2 Driving Environment ...4-2 Vehicle Design ...4-3 Defensive Driving ...4-3 Drunken Driving ...4-4 Control of a Vehicle ...4-7 Braking ...4-7 Anti-Lock Brake System (ABS) ...4-8 Braking in Emergencies ...4-10 Traction Control System (TCS) ...4-10 All-Wheel Drive (AWD) System ...4-12 Steering ...4-12...
  • Page 280: Your Driving, The Road, And Your Vehicle

    Your Driving, the Road, and Your Vehicle Whenever we drive, we are taking on an important responsibility. This is true for any motor vehicle — passenger car, van, truck, sport utility. Driver behavior, the driving environment, and the vehicle’s design all affect how well a vehicle performs. But statistics show that the most important factor, by far, is how we drive.
  • Page 281: Vehicle Design

    Vehicle Design According to the U.S. Department of Transportation, utility vehicles have a significantly higher rollover rate than other types of vehicles. Utility vehicles do have higher ground clearance and a narrower track or shorter wheelbase than passenger cars, to make them more capable for off-road driving.
  • Page 282: Drunken Driving

    Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It is the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: •...
  • Page 283 It is the amount of alcohol that counts. For example, if the same person drank three double martinis (3 ounces or 90 ml of liquor each) within an hour, the person’s BAC would be close to 0.12 percent. A person who consumes food just before or during drinking will have a somewhat lower BAC level.
  • Page 284 But the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night. All drivers are impaired at BAC levels above 0.05 percent.
  • Page 285: Control Of A Vehicle

    Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering, and the accelerator. All three systems have to do their work at the places where the tires meet the road. Sometimes, as when you are driving on snow or ice, it is easy to ask more of those control systems than the tires and road can provide.
  • Page 286: Anti-Lock Brake System (Abs)

    Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a mistake. Your brakes may not have time to cool between hard stops. Your brakes will wear out much faster if you do a lot of heavy braking.
  • Page 287 Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
  • Page 288: Using Anti-Lock

    Remember: Anti-lock does not change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you will not have time to apply your brakes if that vehicle suddenly slows or stops.
  • Page 289 If your vehicle is in cruise control when the traction control system begins to limit wheel spin, the cruise control will automatically disengage. When road conditions allow you to safely use it again, you may reengage the cruise control. See Cruise Control on page 3-10.
  • Page 290: All-Wheel Drive (Awd) System

    All-Wheel Drive (AWD) System If your vehicle has all-wheel drive (AWD), the AWD system operates automatically without any action required by the driver. If the front drive wheels begin to slip, the rear wheels will automatically begin to drive the vehicle as required. There may be a slight engagement noise during hard use but this is normal.
  • Page 291: Steering In Emergencies

    Suppose you are steering through a sharp curve. Then you suddenly apply the brakes. Both control systems — steering and braking — have to do their work where the tires meet the road. Unless you have four-wheel anti-lock brakes, adding the hard braking can demand too much of those places.
  • Page 292: Off-Road Recovery

    An emergency like this requires close attention and a quick decision. If you are holding the steering wheel at the recommended 9 and 3 o’clock positions, you can turn it a full 180 degrees very quickly without removing either hand. But you have to act fast, steer quickly, and just as quickly straighten the wheel once you have avoided the object.
  • Page 293: Passing

    Passing The driver of a vehicle about to pass another on a two-lane highway waits for just the right moment, accelerates, moves around the vehicle ahead, then goes back into the right lane again. A simple maneuver? Not necessarily! Passing another vehicle on a two-lane highway is a potentially dangerous move, since the passing vehicle occupies the same lane as oncoming traffic for several seconds.
  • Page 294: Loss Of Control

    • Check your mirrors, glance over your shoulder, and start your left lane change signal before moving out of the right lane to pass. When you are far enough ahead of the passed vehicle to see its front in your inside mirror, activate your right lane change signal and move back into the right lane.
  • Page 295 A cornering skid is best handled by easing your foot off the accelerator pedal. If you have the Traction Control System (TCS), remember: It helps avoid only the acceleration skid. See Traction Control System (TCS) on page 4-10. If you do not have this system, or if the system is off, then an acceleration skid is also best handled by easing your foot off the accelerator pedal.
  • Page 296: Driving At Night

    Driving at Night Night driving is more dangerous than day driving. One reason is that some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Here are some tips on night driving. •...
  • Page 297: Driving In Rain And On Wet Roads

    Driving in Rain and on Wet Roads Rain and wet roads can mean driving trouble. On a wet road, you cannot stop, accelerate, or turn as well because your tire-to-road traction is not as good as on dry roads. And, if your tires do not have much tread left, you will get even less traction.
  • Page 298: Driving Through Deep Standing Water

    Hydroplaning Hydroplaning is dangerous. So much water can build up under your tires that they can actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When your vehicle is hydroplaning, it has little or no contact with the road. Hydroplaning does not happen often.
  • Page 299: City Driving

    City Driving One of the biggest problems with city streets is the amount of traffic on them. You will want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: •...
  • Page 300: Freeway Driving

    Freeway Driving Mile for mile, freeways — also called thruways, parkways, expressways, turnpikes, or superhighways — are the safest of all roads. But they have their own special rules. 4-22 The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving.
  • Page 301: Before Leaving On A Long Trip

    When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up. Drive on to the next exit. The exit ramp can be curved, sometimes quite sharply. The exit speed is usually posted.
  • Page 302: Highway Hypnosis

    Highway Hypnosis Is there actually such a condition as highway hypnosis? Or is it just plain falling asleep at the wheel? Call it highway hypnosis, lack of awareness, or whatever. There is something about an easy stretch of road with the same scenery, along with the hum of the tires on the road, the drone of the engine, and the rush of the wind against the vehicle that can make you sleepy.
  • Page 303 CAUTION: If you do not shift down, your brakes could get so hot that they would not work well. You would then have poor braking or even none going down a hill. You could crash. Shift down to let your engine assist your brakes on a steep downhill slope.
  • Page 304: Winter Driving

    Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your vehicle. Also see Tires on page 5-51. 4-26 Include an ice scraper, a small brush or broom, a supply of windshield washer fluid, a rag, some winter outer clothing, a small shovel, a flashlight, a red cloth, and a couple of reflective warning triangles.
  • Page 305 What is the worst time for this? Wet ice. Very cold snow or ice can be slick and hard to drive on. But wet ice can be even more trouble because it may offer the least traction of all. You can get wet ice when it is about freezing, 32°F (0°C), and freezing rain begins to fall.
  • Page 306: If You Are Caught In A Blizzard

    Remember, unless you have ABS, if you brake so hard that your wheels stop rolling, you will just slide. Brake so your wheels always keep rolling and you can still steer. • Whatever your braking system, allow greater following distance on any slippery road. •...
  • Page 307 CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
  • Page 308: If Your Vehicle Is Stuck In Sand, Mud, Ice Or Snow

    If Your Vehicle is Stuck in Sand, Mud, Ice or Snow In order to free your vehicle when it is stuck, you will need to spin the wheels, but you do not want to spin your wheels too fast. The method known as rocking can help you get out when you are stuck, but you must use caution.
  • Page 309: Loading Your Vehicle

    Loading Your Vehicle It is very important to know how much weight your vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on your vehicle show how much weight it may properly carry, the Tire and Loading Information label and the Certification/Tire label.
  • Page 310: Steps For Determining Correct Load Limit

    The Tire and Loading Information label also shows the size of the original equipment tires (C) and the recommended cold tire inflation pressures (D). For more information on tires and inflation see Tires on page 5-51 and Inflation - Tire Pressure on page 5-57. There is also important loading information on the vehicle Certification/Tire label.
  • Page 311 Example 1 Item Description Vehicle Capacity Weight for Example 1 Subtract Occupant Weight 150 lbs (68 kg) Available Occupant and Cargo Weight Total Item 1,000 lbs (453 kg) 300 lbs (136 kg) 700 lbs (317 kg) Example 2 Description Vehicle Capacity 1,000 lbs (453 kg) Weight for Example 2 Subtract...
  • Page 312: Certification/Tire Label

    Example 3 Item Description Vehicle Capacity Weight for Example 3 Subtract Occupant Weight 200 lbs (91 kg) Available Cargo Weight Refer to your vehicle’s tire and loading information label for specific information about your vehicle’s capacity weight and seating positions. The combined weight of the driver, passengers, and cargo should never exceed your vehicle’s capacity weight.
  • Page 313 The Certification/Tire label also tells you the maximum weights for the front and rear axles, called the Gross Axle Weight Rating (GAWR). To find out the actual loads on your front and rear axles, you need to go to a weigh station and weigh your vehicle.
  • Page 314: Towing

    Towing Towing Your Vehicle Consult your dealer or a professional towing service if you need to have your disabled vehicle towed. See Roadside Assistance Program on page 7-6. If you want to tow your vehicle behind another vehicle for recreational purposes (such as behind a motorhome), see “Recreational Vehicle Towing”...
  • Page 315: Dinghy Towing

    Dinghy Towing Your vehicle was not designed to be towed with all of its wheels on the ground. If you have a two-wheel-drive vehicle, it can be towed with two of its wheels on the ground. See “Dolly Towing” following. If you have an all-wheel-drive vehicle, it cannot be towed with any of its wheels on the ground.
  • Page 316: Level Control

    Level Control On vehicles equipped with automatic level control, the rear of the vehicle is automatically kept level as you load or unload your vehicle. However, you should still not exceed the GVWR or the GAWR. See Loading Your Vehicle on page 4-31. You may hear the compressor operating when you load or unload your vehicle, and periodically as the system self-adjusts.
  • Page 317: If You Do Decide To Pull A Trailer

    Your vehicle can tow a trailer. To identify the trailering capacity of your vehicle, you should read the information in “Weight of the Trailer” that appears later in this section. Trailering is different than just driving your vehicle by itself. Trailering means changes in handling, acceleration, braking, durability, and fuel economy.
  • Page 318: Weight Of The Trailer

    You can ask your dealer for our trailering information or advice, or you can write us at: Buick Customer Assistance Center P.O. Box 33136 Detroit, MI 48232-5136 In Canada, write to:...
  • Page 319: Weight Of The Trailer Tongue

    Weight of the Trailer Tongue The tongue load (A) of any trailer is an important weight to measure because it affects the total or gross weight of your vehicle. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo you may carry in it, and the people who will be riding in the vehicle.
  • Page 320 Trailering may also be limited by the vehicle’s ability to carry tongue weight. Tongue weight cannot cause the vehicle to exceed the GVWR (Gross Vehicle Weight Rating) or the RGAWR (Rear Gross Axle Weight Rating). The effect of additional weight may reduce your trailering capacity more than the total of the additional weight.
  • Page 321: Total Weight On Your Vehicle's Tires

    But, you must still consider the effect on the rear axle. Because your rear axle now weighs 3,100 lbs (1 406 kg), you can only put 900 lbs (408 kg) on the rear axle without exceeding RGAWR. The effect of tongue weight is about 1.5 times the actual weight.
  • Page 322: Driving With A Trailer

    Safety Chains You should always attach chains between your vehicle and your trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer.
  • Page 323: Following Distance

    Towing a trailer requires a certain amount of experience. Before setting out for the open road, you will want to get to know your rig. Acquaint yourself with the feel of handling and braking with the added weight of the trailer. And always keep in mind that the vehicle you are driving is now a good deal longer and not nearly as responsive as your vehicle is by itself.
  • Page 324: Turn Signals When Towing A Trailer

    Turn Signals When Towing a Trailer When you tow a trailer, your vehicle has to have extra wiring. The arrows on your instrument panel will flash whenever you signal a turn or lane change. Properly hooked up, the trailer lamps will also flash, telling other drivers you are about to turn, change lanes or stop.
  • Page 325: Maintenance When Trailer Towing

    When You Are Ready to Leave After Parking on a Hill 1. Apply your regular brakes and hold the pedal down while you: • Start your engine. • Shift into a gear. • Release the parking brake. 2. Let up on the brake pedal. 3.
  • Page 326 NOTES 4-48...
  • Page 327: Service And Appearance Care

    Section 5 Service ...5-3 Accessories and Modifications ...5-3 California Proposition 65 Warning ...5-3 Doing Your Own Service Work ...5-4 Adding Equipment to the Outside of Your Vehicle ...5-4 Fuel ...5-4 Gasoline Octane ...5-5 Gasoline Specifications ...5-5 California Fuel ...5-5 Additives ...5-6 Fuels in Foreign Countries ...5-6 Filling the Tank ...5-7 Filling a Portable Fuel Container ...5-8...
  • Page 328 Section 5 Uniform Tire Quality Grading ...5-64 Wheel Alignment and Tire Balance ...5-66 Wheel Replacement ...5-66 Tire Chains ...5-67 Accessory Inflator ...5-68 If a Tire Goes Flat ...5-69 Changing a Flat Tire ...5-70 Removing the Spare Tire and Tools ...5-71 Removing the Flat Tire and Installing the Spare Tire ...5-77 Secondary Latch System ...5-81...
  • Page 329: Service

    Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine GM parts and GM-trained and supported service people. We hope you will want to keep your GM vehicle all GM.
  • Page 330: Doing Your Own Service Work

    Doing Your Own Service Work CAUTION: You can be injured and your vehicle could be damaged if you try to do service work on a vehicle without knowing enough about it. • Be sure you have sufficient knowledge, experience, the proper replacement parts, and tools before you attempt any vehicle maintenance task.
  • Page 331: Gasoline Octane

    Gasoline Octane If your vehicle has the 3.5L V6 engine (VIN Code 8), use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, you may notice an audible knocking noise when you drive, commonly referred to as spark knock.
  • Page 332: Additives

    Additives To provide cleaner air, all gasolines in the United States are now required to contain additives that will help prevent engine and fuel system deposits from forming, allowing your emission control system to work properly. In most cases, you should not have to add anything to your fuel.
  • Page 333: Filling The Tank

    Filling the Tank CAUTION: Fuel vapor burns violently and a fuel fire can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling. Do not smoke if you are near fuel or refueling your vehicle.
  • Page 334: Filling A Portable Fuel Container

    When replacing the fuel cap, turn it clockwise until it clicks. Make sure the cap is fully installed. The diagnostic system can determine if the fuel cap has been left off or improperly installed. This would allow fuel to evaporate into the atmosphere. See Malfunction Indicator Lamp on page 3-46.
  • Page 335: Checking Things Under The Hood

    Checking Things Under the Hood CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and start a fire.
  • Page 336: Engine Compartment Overview

    Engine Compartment Overview When you lift the hood of the 3.5L V6 engine, here is what you will see: 5-10...
  • Page 337 A. Underhood Fuse Block. See Underhood Fuse Block on page 5-103. B. Remote Positive (+) Terminal. See Jump Starting on page 5-38. C. Windshield Washer Fluid Reservoir. See “Adding Washer Fluid” under Windshield Washer Fluid on page 5-33. D. Radiator Pressure Cap. See Radiator Pressure Cap on page 5-23.
  • Page 338 When you lift the hood of the 3.6L V6 engine, here is what you will see: 5-12...
  • Page 339: Engine Oil

    A. Windshield Washer Fluid Reservoir. See “Adding Washer Fluid” under Windshield Washer Fluid on page 5-33. B. Underhood Fuse Block. See Underhood Fuse Block on page 5-103. C. Battery. See Battery on page 5-37. D. Remote Positive (+) Terminal. See Jump Starting on page 5-38.
  • Page 340: When To Add Engine Oil

    When to Add Engine Oil 3.5L V6 Engine 3.6L V6 Engine 5-14 If the oil is below the cross-hatched area at the tip of the dipstick, you will need to add at least one quart/liter of oil. But you must use the right kind. This section explains what kind of oil to use.
  • Page 341: What Kind Of Engine Oil To Use

    What Kind of Engine Oil to Use Look for two things: • GM6094M Your vehicle’s engine requires oil meeting GM Standard GM6094M. You should look for and use only an oil that meets GM Standard GM6094M. • SAE 5W-30 As shown in the viscosity chart, SAE 5W-30 is best for your vehicle.
  • Page 342: Engine Oil Additives

    If you are in an area of extreme cold, where the temperature falls below 20°F ( 29°C), it is recommended that you use either an SAE 5W-30 synthetic oil or an SAE 0W-30 oil. Both will provide easier cold starting and better protection for your engine at extremely low temperatures.
  • Page 343: How To Reset The Engine Oil Life System

    How to Reset the Engine Oil Life System The Engine Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE ENGINE OIL message being turned on, reset the system.
  • Page 344: When To Inspect The Engine Air Cleaner/Filter

    Engine Air Cleaner/Filter See Engine Compartment Overview on page 5-10 for the location of the engine air cleaner/filter. When to Inspect the Engine Air Cleaner/Filter Inspect the air cleaner/filter at the Maintenance II intervals and replace it at the first oil change after each 50,000 mile (83 000 km) interval.
  • Page 345: How To Check Automatic Transaxle Fluid

    6. Latch the hooks to secure the panel in place. If the panel moves easily, check that the tabs are seated correctly in the slots. 7. Put the duct back on and reinstall the clamps. CAUTION: Operating the engine with the air cleaner/filter off can cause you or others to be burned.
  • Page 346: Checking The Fluid Level

    Wait at least 30 minutes before checking the transaxle fluid level if you have been driving: • When outside temperatures are above 90°F (32°C). • At high speed for quite a while. • In heavy traffic — especially in hot weather. To get the right reading, the fluid should be at normal operating temperature, which is 180°F to 200°F (82°C to 93°C).
  • Page 347: How To Add Automatic Transaxle Fluid

    How to Add Automatic Transaxle Fluid Refer to the Maintenance Schedule to determine what kind of transaxle fluid to use. See Recommended Fluids and Lubricants on page 6-12. If the fluid level is low, add only enough of the proper fluid to bring the level into the cross-hatched area on the dipstick.
  • Page 348: What Coolant To Use

    What Coolant to Use Use a mixture of one-half clean, drinkable water and ® one-half DEX-COOL coolant which will not damage aluminum parts. If you use this coolant mixture, you do not need to add anything else. CAUTION: Adding only plain water to your cooling system can be dangerous.
  • Page 349: Adding Coolant

    Adding Coolant If you need more coolant, add the proper DEX-COOL coolant mixture at the coolant recovery tank, but be careful not to spill it. CAUTION: Turning the radiator pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly.
  • Page 350: If No Steam Is Coming From Your Engine

    If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Just turn it off and get everyone away from the vehicle until it cools down.
  • Page 351: Overheated Engine Protection Operating Mode

    If you get the overheat warning with no sign of steam, try this for a minute or so: 1. If your air conditioner is on, turn it off. 2. Turn on your heater to full hot at the highest fan speed and open the windows as necessary.
  • Page 352: Cooling System

    Cooling System When you decide it is safe to lift the hood, here is what you will see: 3.5L V6 Engine A. Radiator Pressure Cap B. Electric Engine Cooling Fans C. Engine Coolant Recovery Tank 5-26 3.6L V6 Engine A. Radiator Pressure Cap B.
  • Page 353 If the coolant inside the coolant recovery tank is boiling, do not do anything else until it cools down. The vehicle should be parked on a level surface. The coolant level should be at or above the full cold mark. If it is not, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump, or somewhere else in the cooling system.
  • Page 354 How to Add Coolant to the Coolant Recovery Tank If you have not found a problem yet, but the coolant level is not at or above the full cold mark, add a 50/50 mixture of clean, drinkable water and ® DEX-COOL engine coolant at the coolant recovery tank.
  • Page 355: How To Add Coolant To The Radiator

    If the overheat warning continues, there is one more thing you can try. You can add the proper coolant mixture directly to the radiator, but be sure the cooling system is cool before you do it. CAUTION: Steam and scalding liquids from a hot cooling system can blow out and burn you badly.
  • Page 356 2. Then keep turning the pressure cap, but now push down as you turn it. Remove the pressure cap. CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough.
  • Page 357 3.5L V6 Engine shown, 3.6L V6 Engine similar 6. Start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fans. 7. By this time, the coolant level inside the radiator filler neck may be lower.
  • Page 358: What Power Steering Fluid To Use

    Power Steering Fluid See Engine Compartment Overview on page 5-10 for reservoir location. When to Check Power Steering Fluid It is not necessary to regularly check power steering fluid unless you suspect there is a leak in the system or you hear an unusual noise.
  • Page 359: Windshield Washer Fluid

    Windshield Washer Fluid What Washer Fluid to Use When you need windshield washer fluid, be sure to read the manufacturer’s instructions before use. If you will be operating your vehicle in an area where the temperature may fall below freezing, use a fluid that has sufficient protection against freezing.
  • Page 360: Brake Fluid

    Brakes Brake Fluid Your brake master cylinder reservoir is filled with DOT-3 brake fluid. See Engine Compartment Overview on page 5-10 for the location of the reservoir. There are only two reasons why the brake fluid level in the reservoir might go down. The first is that the brake fluid goes down to an acceptable level during normal brake lining wear.
  • Page 361: What To Add

    What to Add When you do need brake fluid, use only DOT-3 brake fluid. Use new brake fluid from a sealed container only. See Recommended Fluids and Lubricants on page 6-12. Always clean the brake fluid reservoir cap and the area around the cap before removing it.
  • Page 362: Brake Pedal Travel

    Brake Wear Your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving, except when you are pushing on the brake pedal firmly.
  • Page 363: Replacing Brake System Parts

    Replacing Brake System Parts The braking system on a vehicle is complex. Its many parts have to be of top quality and work well together if the vehicle is to have really good braking. Your vehicle was designed and tested with top-quality GM brake parts.
  • Page 364: Jump Starting

    Jump Starting If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION: Batteries can hurt you. They can be dangerous because: •...
  • Page 365 4. Open the hood on the other vehicle and locate the positive (+) and negative ( ) terminal locations on that vehicle. You will not need to access your battery for jump starting. Your vehicle has a remote positive (+) jump starting terminal for that purpose.
  • Page 366 CAUTION: Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Be sure the battery has enough water. You do not need to add water to the battery installed in your new vehicle.
  • Page 367 Notice: If you connect a negative cable to the ECM, ECM mounting bracket or any cables that attach to the ECM bracket, you may damage the ECM. Attach the negative cable to a heavy, unpainted metal engine part, other than the ECM, ECM bracket or cables attached to the ECM bracket.
  • Page 368 Notice: If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the vehicle. The repairs would not be covered by your warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.
  • Page 369: All-Wheel Drive

    All-Wheel Drive If you have an all-wheel-drive vehicle, be sure to perform the lubricant checks described in this section. All-wheel-drive vehicles have two additional systems that need lubrication. Transfer Case (Power Transfer Unit) When to Check Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant.
  • Page 370: Bulb Replacement

    Carrier Assembly-Differential (Rear Drive Module) When to Check and Change Lubricant Refer to the Maintenance Schedule to determine how often to check the lubricant and when to change it. See Scheduled Maintenance on page 6-4. How to Check Lubricant To get an accurate reading, the vehicle should be on a level surface.
  • Page 371: Headlamps, Front Turn Signal, Sidemarker, And Parking Lamps

    Headlamps, Front Turn Signal, Sidemarker, and Parking Lamps 1. Open the hood. See Hood Release on page 5-9 for more information. 2. Push in on the headlamp panel and lift up the headlamp retaining clip partway, but do not remove. 3.
  • Page 372 8. Unhook the electrical connector by lifting up the gray tabs and separate the connector from the bulb base. 5-46 9. Install the appropriate new bulb into the electrical connector. Push the bulb firmly enough so that the gray tabs hook over the tab on the bulb. 10.
  • Page 373: Taillamps, Turn Signal, And Stoplamps

    Taillamps, Turn Signal, and Stoplamps 1. Open the liftgate. See Liftgate on page 2-11 for more information. 2. Remove the two screws on the inboard taillamp panel. 3. Pull the lamp directly rearward from the vehicle. 4. Turn the bulb socket one-quarter of a turn counterclockwise.
  • Page 374: Taillamps And Back-Up Lamps

    Taillamps and Back-Up Lamps This procedure is for the liftgate-mounted taillamps and back-up lamps. To replace one of these bulbs, do the following: 1. Open the liftgate. See Liftgate on page 2-11 for more information. 2. Remove the panel inside the liftgate by lifting the tabs and pulling the panel off.
  • Page 375: Replacement Bulbs

    11. Reinstall the lamp assembly on the liftgate. 12. Gently lift the liftgate. 13. Reinstall the seven wing nuts and the four outboard nuts. 14. Reinstall the panel inside the liftgate by connecting the tabs. 15. Close the liftgate. Replacement Bulbs Exterior Lamp Front Turn Signal/Parking Lamp Headlamps...
  • Page 376 To replace the windshield wiper blade assembly do the following: 1. Lift the wiper arm away from the windshield. 5-50 2. Push the release lever (B) to disengage the hook and push the wiper arm (A) out of the blade (C). 3.
  • Page 377: Tires

    Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your GM Warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your vehicle’s Owner Manual.
  • Page 378: Tire Sidewall Labeling

    Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The examples below show a typical passenger vehicle tire and a compact spare tire sidewall. Passenger (P-Metric) Tire Example (A) Tire Size: The tire size is a combination of letters and numbers used to define a particular tire’s width, height, aspect ratio, construction type, and service description.
  • Page 379 Compact Spare Tire Example (A) Temporary Use Only: The compact spare tire or temporary use tire has a tread life of approximately 3,000 miles (5 000 km) and should not be driven at speeds over 65 mph (105 km/h). The compact spare tire is for emergency use when a regular road tire has lost air and gone flat.
  • Page 380: Tire Size

    Tire Size The following illustration shows an example of a typical passenger vehicle tire size. (A) Passenger (P-Metric) Tire: The United States version of a metric tire sizing system. The letter P as the first character in the tire size means a passenger vehicle tire engineered to standards set by the U.S.
  • Page 381: Tire Terminology And Definitions

    Tire Terminology and Definitions Air Pressure: The amount of air inside the tire pressing outward on each square inch of the tire. Air pressure is expressed in pounds per square inch (psi) or kilopascal (kPa). Accessory Weight: This means the combined weight of optional accessories.
  • Page 382 Light Truck (LT-Metric) Tire: A tire used on light duty trucks and some multipurpose passenger vehicles. Load Index: An assigned number ranging from 1 to 279 that corresponds to the load carrying capacity of a tire. Maximum Inflation Pressure: The maximum air pressure to which a cold tire may be inflated.
  • Page 383: Inflation - Tire Pressure

    Treadwear Indicators: Narrow bands, sometimes called “wear bars,” that show across the tread of a tire when only 1/16 inch (1.6 mm) of tread remains. See When It Is Time for New Tires on page 5-62. UTQGS (Uniform Tire Quality Grading Standards): A tire information system that provides consumers with ratings for a tire’s traction, temperature, and treadwear.
  • Page 384: When To Check

    A Tire and Loading Information label is attached to the vehicle’s center pillar (B-pillar), below the driver’s door latch. This label shows your vehicle’s original equipment tires and the correct inflation pressures for your tires when they are cold. The recommended cold tire inflation pressure, shown on the label, is the minimum amount of air pressure needed to support your vehicle’s maximum load carrying capacity.
  • Page 385: Check Tire Pressure System

    Check Tire Pressure System Your vehicle may have a check tire pressure system that can alert you to a large change in the pressure of one tire. The system won’t alert you before you drive that a tire is low or flat. You must begin driving before the system will work properly.
  • Page 386: Tire Inspection And Rotation

    To reset the system, do the following: 1. With the engine off, turn the ignition to ON. 2. Press the MODE button until the DIC reads LOW TIRE PRESSURE HOLD SET TO RESET. 3. Press and hold the SET button until you hear a chime, and TIRE PRESSURE RESET is displayed.
  • Page 387 When rotating your tires, always use the correct rotation pattern shown here. Do not include the compact spare tire in your tire rotation. After the tires have been rotated, adjust the front and rear inflation pressures as shown on the Tire and Loading Information label.
  • Page 388: When It Is Time For New Tires

    When It Is Time for New Tires One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining.
  • Page 389 CAUTION: Mixing tires could cause you to lose control while driving. If you mix tires of different sizes, brands, or types (radial and bias-belted tires), the vehicle may not handle properly, and you could have a crash. Using tires of different sizes, brands, or types may also cause damage to your vehicle.
  • Page 390: Different Size Tires And Wheels

    Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires, this may affect the way your vehicle performs, including its braking, ride and handling characteristics, stability and resistance to rollover.
  • Page 391 Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and a half (1.5) times as well on the government course as a tire graded 100.
  • Page 392: Wheel Alignment And Tire Balance

    Wheel Alignment and Tire Balance The tires and wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing will not be necessary on a regular basis.
  • Page 393: Used Replacement Wheels

    Used Replacement Wheels CAUTION: Putting a used wheel on your vehicle is dangerous. You cannot know how it has been used or how far it has been driven. It could fail suddenly and cause a crash. If you have to replace a wheel, use a new GM original equipment wheel.
  • Page 394: Accessory Inflator

    Accessory Inflator Your vehicle may have an accessory inflator. With it, you can inflate things like air mattresses and basketballs, and you can also use it to bring your tires up to the proper pressure. The accessory inflator is located in the rear compartment on the driver’s side.
  • Page 395: If A Tire Goes Flat

    Notice: If you run the accessory inflator longer than 30 minutes at a time, you could damage the inflator. The repairs would not be covered by your warranty. Run the inflator for short periods of time only. After running the accessory inflator for 30 minutes, wait at least 10 minutes before restarting the accessory inflator.
  • Page 396: Changing A Flat Tire

    Changing a Flat Tire If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place. Turn on your vehicle’s hazard warning flashers. See Hazard Warning Flashers on page 3-6 for more information. CAUTION: Changing a tire can be dangerous.
  • Page 397: Removing The Spare Tire And Tools

    When your vehicle has a flat tire, use the following example as a guide to assist you in the placement of wheel blocks. The following information will tell you next how to use the jack and change a tire. Removing the Spare Tire and Tools The equipment you will need is located in the storage compartment on...
  • Page 398 A. Jack D. Folding Wrench B. Wing Bolt E. Wing Nut C. Jacking Instructions F. J-Hook 2. Remove the jack and jacking tools by turning the wing bolt counterclockwise. Lift up slightly on the jack to remove it from the bracket.
  • Page 399 Removing the Spare Tire (Vehicles without a Rear Convenience Center) The compact spare tire is located under the vehicle, behind the rear bumper. Use the spare tire hoist to raise, lower and store the compact spare tire. See Compact Spare Tire on page 5-90 for more information about the compact spare.
  • Page 400 5. Turn the wrench clockwise to raise the cable back up after removing the spare tire. Do not store a full-size or a flat road tire under the vehicle. See Storing a Flat or Spare Tire and Tools on page 5-84. To continue changing the flat tire, see Removing the Flat Tire and Installing the Spare Tire on page 5-77.
  • Page 401 Removing the Spare Tire (Vehicles with a Rear Convenience Center) The compact spare tire is located under the vehicle, ahead of the rear bumper. See Compact Spare Tire on page 5-90 for more information about the compact spare. A. Rear Convenience D.
  • Page 402 6. Turn the wrench clockwise to raise the cable back up after removing the spare tire. Do not store a full-size or a flat road tire under the vehicle. See Storing a Flat or Spare Tire and Tools on page 5-84. To continue changing the flat tire, see Removing the Flat Tire and Installing the Spare Tire on page 5-77.
  • Page 403: Removing The Flat Tire And Installing The Spare Tire

    Removing the Flat Tire and Installing the Spare Tire 1. If there is a wheel cover, loosen the plastic nut caps with the wheel wrench. They will not come off. Then, using the flat end of the wheel wrench, pry along the edge of the cover until it comes off. Be careful;...
  • Page 404 CAUTION: Getting under a vehicle when it is jacked up is dangerous. If the vehicle slips off the jack you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack. CAUTION: Raising your vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall.
  • Page 405 CAUTION: Rust or dirt on the wheel, or on the parts to which it is fastened, can make the wheel nuts become loose after a time. The wheel could come off and cause an accident. When you change a wheel, remove any rust or dirt from the places where the wheel attaches to the vehicle.
  • Page 406 CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to come loose and even come off. This could lead to an accident. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new GM original equipment wheel nuts.
  • Page 407: The Spare Tire

    Secondary Latch System Your vehicle has an underbody mounted tire hoist assembly equipped with a secondary latch system. It is designed to stop the compact spare tire from suddenly falling off your vehicle if the cable holding the spare tire is damaged. For the secondary latch to work, the tire must be stowed with the valve stem pointing down.
  • Page 408 1. If the cable is not visible, start this procedure at Step 3. All-Wheel-Drive Vehicle shown 2. Turn the folding wrench counterclockwise until approximately 6 inches (15 cm) of cable is exposed. 5-82 Front-Wheel-Drive Vehicle shown 3. Attach the folding wrench to the jack and raise the jack at least 10 turns.
  • Page 409 7. Lower the jack by turning the folding wrench counterclockwise. Keep lowering the jack until the spare tire slides off the jack. 8. Disconnect the folding wrench from the jack and carefully remove the jack. Use one hand to push against the spare tire while firmly pulling the jack out from under the spare tire with the other hand.
  • Page 410: Storing A Flat Or Spare Tire And Tools

    Storing a Flat or Spare Tire and Tools Storing the Flat Tire (Vehicles without Stowable Seat and without Rear Convenience Center) A. D-Ring D. Valve Stem B. Wing Nut E. Full-Size Tire C. J-Hook 5-84 1. Flip up the D-ring located in the rear cargo area. 2.
  • Page 411 Storing the Flat Tire (Vehicles with a Rear Convenience Center) A. D-Ring E. Full-Size Tire B. Rear Convenience F. Cap on Bottom Center C. Wing Nut D. J-Hook 1. Open the center storage compartment door of the rear convenience center. 2.
  • Page 412 Storing the Flat Tire (Vehicles with a Stowable Seat) A. Rear Convenience D. Stowable Seat Strap Center E. Cargo Net Hook B. Full-Size Tire F. J-Hook C. D-Ring G. Wing Nut 5-86 1. If the seatback is not in an upright position, move it to an upright position.
  • Page 413 Storing the Flat Tire (Vehicles with a Stowable Seatback Folded Flat) A. Stowable Seat D. J-Hook B. Full-Size Tire E. D-Ring C. Wing Nut 1. Fold the seatback down and flip the D-ring up. 2. Lay the tire on the seatback with the valve stem pointing up with the center hole of the tire over the D-ring.
  • Page 414: Storing The Spare Tire And Tools

    Storing the Spare Tire and Tools CAUTION: Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place. CAUTION: The underbody-mounted spare tire needs to be stored with the valve stem pointing down.
  • Page 415 8. Raise the tire fully against the underside of the vehicle. Continue turning the folding wrench until you feel more than two clicks. This indicates that the compact spare tire is secure and the cable is tight. The spare tire hoist cannot be overtightened. 9.
  • Page 416: Compact Spare Tire

    Compact Spare Tire Although the compact spare tire was fully inflated when your vehicle was new, it can lose air after a time. Check the inflation pressure regularly. It should be 60 psi (420 kPa). After installing the compact spare on your vehicle, you should stop as soon as possible and make sure your spare tire is correctly inflated.
  • Page 417: Cleaning The Inside Of Your Vehicle

    Appearance Care Cleaning the Inside of Your Vehicle Your vehicle’s interior will continue to look its best if it is cleaned often. Although not always visible, dust and dirt can accumulate on your upholstery. Dirt can damage carpet, fabric, leather, and plastic surfaces. Regular vacuuming is recommended to remove particles from your upholstery.
  • Page 418: Fabric/Carpet

    Do not clean your vehicle using the following cleaners or techniques: • Never use a knife or any other sharp object to remove a soil from any interior surface. • Never use a stiff brush. It can cause damage to your vehicle’s interior surfaces.
  • Page 419: Leather

    If any of the soil remains, a commercial fabric cleaner or spot lifter may be necessary. When a commercial upholstery cleaner or spot lifter is to be used, test a small hidden area for colorfastness first. If the locally cleaned area gives any impression that a ring formation may result, clean the entire surface.
  • Page 420: Care Of Safety Belts

    Care of Safety Belts Keep belts clean and dry. CAUTION: Do not bleach or dye safety belts. If you do, it may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.
  • Page 421: Finish Care

    Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint finish. GM-approved cleaning products can be obtained from your dealer. See Vehicle Care/Appearance Materials on page 5-98. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it.
  • Page 422: Aluminum Or Chrome-Plated Wheels

    Aluminum or Chrome-Plated Wheels The vehicle may be equipped with either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel. A wax may then be applied.
  • Page 423: Sheet Metal Damage

    Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the warranty.
  • Page 424: Vehicle Care/Appearance Materials

    Vehicle Care/Appearance Materials Description Polishing Cloth Interior and exterior Wax-Treated polishing cloth. Tar and Road Oil Removes tar, road oil, Remover and asphalt. Chrome Cleaner Use on chrome or and Polish stainless steel. White Sidewall Tire Removes soil and black Cleaner marks from whitewalls.
  • Page 425: Vehicle Identification Number (Vin)

    Vehicle Identification Vehicle Identification Number (VIN) This is the legal identifier for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle.
  • Page 426: Add-On Electrical Equipment

    Electrical System Add-On Electrical Equipment Notice: Don’t add anything electrical to your vehicle unless you check with your dealer first. Some electrical equipment can damage your vehicle and the damage wouldn’t be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should.
  • Page 427: Fuses And Circuit Breakers

    Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses, circuit breakers, and fusible thermal links. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse. Be sure you replace a bad fuse with a new one of the identical size and rating.
  • Page 428 Fuse Empty Steering Wheel Radio Controls Power Door Locks Empty Empty Empty Empty Empty Empty Turn Signal and Hazard Lamp Flashers 5-102 Usage Fuse Usage Power Seats Electronic Level Control (ELC) Compressor Liftgate and Endgate Rear Auxiliary Power Outlet Electronic Level Control (ELC) Compressor Relay and Height Sensor Heated Mirrors...
  • Page 429: Underhood Fuse Block

    Fuse Usage Power Sunroof Power Windows Map Lamps, Courtesy Lamps and Instrument Panel Lights Radio UQ3 Radio Amplifier Head-Up Display Hazard Flashers Instrument Panel Cluster, Climate Control, Security LED and Remote Keyless Entry Mode ® PASS-Key Body Control Module (BCM) Automatic Occupant Sensing Module Relay...
  • Page 430 Fuse Fuel Pump Air Conditioning Compressor Clutch Horn Anti-lock Brake System (ABS) Engine Control Module (ECM) Powertrain Relay Powertrain Sensors Transmission Control Module (TCM) Anti-lock Brake System (ABS) Solenoids Valves Oxygen Sensor/MAF Sensor 5-104 Usage Fuse Usage Fuel Injectors (Even) Fuel Injectors (Odd) Daytime Running Lamps (DRL) Passenger’s Low-Beam Headlamp...
  • Page 431 Fuse Usage Anti-lock Brake System (ABS) Motor Engine Cooling Fan 2 Engine Cooling Fan 1 Main Battery Fuse for Retained Accessory Power Relay and Accessory Relay Main Battery Fuse for Heated Seats, Air Conditioning, Defogger Main Battery Fuse for Power Outlets, Level Control, Power Seats, Mirrors, and Body Computer Main Battery Fuse for Climate...
  • Page 432: Capacities And Specifications

    Capacities and Specifications The following approximate capacities are given in English and metric conversions. See Recommended Fluids and Lubricants on page 6-12 for more information. Application Automatic Transaxle – Front Wheel Drive Pan Removal and Replacement Automatic Transaxle – All Wheel Drive Pan Removal and Replacement Cooling System Engine Oil with Filter...
  • Page 433 Section 6 Maintenance Schedule ...6-2 Introduction ...6-2 Maintenance Requirements ...6-2 Your Vehicle and the Environment ...6-2 Using the Maintenance Schedule ...6-3 Scheduled Maintenance ...6-4 Additional Required Services ...6-6 Maintenance Footnotes ...6-7 Maintenance Schedule Owner Checks and Services ...6-9 At Each Fuel Fill ...6-9 At Least Once a Month ...6-9 At Least Once a Year ...6-10 Recommended Fluids and Lubricants ...6-12...
  • Page 434: Maintenance Schedule

    Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet or your dealer for details. Maintenance Requirements Notice: Maintenance intervals, checks, inspections, replacement parts, and recommended fluids and...
  • Page 435: Using The Maintenance Schedule

    Using the Maintenance Schedule We at General Motors want to help you keep your vehicle in good working condition. But we do not know exactly how you will drive it. You may drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather.
  • Page 436: Scheduled Maintenance

    If you want to purchase service information, see Service Publications Ordering Information on page 7-14. Owner Checks and Services on page 6-9 tells you what should be checked, when to check it, and what you can easily do to help keep your vehicle in good condition. The proper replacement parts, fluids, and lubricants to use are listed in Recommended Fluids and Lubricants on page 6-12 and Normal Maintenance Replacement...
  • Page 437 Scheduled Maintenance Service Maintenance I Maintenance II Change engine oil and filter. See Engine Oil on page 5-13. Reset oil life system. See Engine Oil Life System on page 5-16. An Emission Control Service. Visually check for any leaks or damage. See footnote (j). Inspect engine air cleaner filter.
  • Page 438: Additional Required Services

    Additional Required Services The following services should be performed at the first maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components.
  • Page 439: Maintenance Footnotes

    Service and Miles (Kilometers) Engine cooling system service (or every five years, whichever occurs first). An Emission Control Service. See footnote (i). Inspect engine accessory drive belt. An Emission Control Service. See footnote (m). Maintenance Footnotes (a) Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc.
  • Page 440 (e) Make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors, and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
  • Page 441: Owner Checks And Services

    Owner Checks and Services These owner checks and services should be performed at the intervals specified to help ensure the safety, dependability and emission control performance of your ® vehicle. Your GM Goodwrench dealer can assist you with these checks and services. Be sure any necessary repairs are completed at once.
  • Page 442: At Least Once A Year

    At Least Once a Year Starter Switch Check CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle.
  • Page 443: Ignition Transaxle Lock Check

    Ignition Transaxle Lock Check While parked, and with the parking brake set, try to turn the ignition to OFF in each shift lever position. • The ignition should turn to OFF only when the shift lever is in PARK (P). •...
  • Page 444: Recommended Fluids And Lubricants

    Recommended Fluids and Lubricants Fluids and lubricants identified below by name, part number, or specification may be obtained from your dealer. Usage Fluid/Lubricant Engine oil which meets GM Standard GM6094M and displays the American Petroleum Institute Certified for Gasoline Engines starburst symbol.
  • Page 445: Normal Maintenance Replacement Parts

    Normal Maintenance Replacement Parts Replacement parts identified below by name, part number, or specification can be obtained from your GM dealer. Part Engine Air Cleaner/Filter Engine Oil Filter 3.5L V6 3.6L V6 Passenger Compartment Air Filter Kit Spark Plugs 3.5L V6 3.6L V6 Windshield Wiper Blades (Hook Type) Driver’s Side –...
  • Page 446: Maintenance Record

    Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 6-2. Any additional information from Owner Checks and Services on page 6-9 can be added on the following record pages. You should retain all maintenance receipts.
  • Page 447 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-15...
  • Page 448 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II 6-16...
  • Page 449: Customer Assistance And Information

    Section 7 Customer Assistance and Information ...7-2 Customer Satisfaction Procedure ...7-2 Online Owner Center ...7-3 Customer Assistance for Text Telephone (TTY) Users ...7-4 Customer Assistance Offices ...7-4 GM Mobility Reimbursement Program ...7-5 Roadside Assistance Program ...7-6 Courtesy Transportation ...7-7 Vehicle Data Collection and Event Data Recorders ...7-9 Collision Damage Repair ...7-10 Customer Assistance and Information...
  • Page 450: Customer Assistance And Information

    Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Buick. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your GM dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
  • Page 451: Online Owner Center

    The BBB Auto Line Program is an out of court program administered by the Council of Better Business Bureaus to settle automotive disputes regarding vehicle repairs or the interpretation of the New Vehicle Limited Warranty. Although you may be required to resort to this informal dispute resolution program prior to filing a court action, use of the program is free of charge and your case will generally be heard within...
  • Page 452: Customer Assistance For Text Telephone (Tty) Users

    Customer Assistance Offices Buick encourages customers to call the toll-free number for assistance. If a U.S. customer wishes to write to Buick, the letter should be addressed to Buick’s Customer Assistance Center. United States — Customer Assistance Buick Customer Assistance Center P.O.
  • Page 453: Overseas - Customer Assistance

    Overseas — Customer Assistance Please contact the local General Motors Business Unit. Mexico, Central America and Caribbean Islands/Countries (Except Puerto Rico and U.S. Virgin Islands) — Customer Assistance General Motors de Mexico, S. de R.L. de C.V. Customer Assistance Center Paseo de la Reforma # 2740 Col.
  • Page 454: Roadside Assistance Program

    Roadside Assistance Program Call 1-800-252-1112 for Buick Roadside Assistance. As the proud owner of a new Buick vehicle, you are automatically enrolled in the Buick Roadside Assistance program. This value-added service is intended to provide you with peace of mind as you drive in the city or travel the open road.
  • Page 455: Scheduling Service Appointments

    Buick Roadside Assistance: 1-800-252-1112, text telephone (TTY) users, call 1-888-889-2438. Buick reserves the right to limit services or reimbursement to an owner or driver when, in Buick’s judgement, the claims become excessive in frequency or type of occurrence.
  • Page 456: Transportation Options

    Transportation Options Warranty service can generally be completed while you wait. However, if you are unable to wait, GM helps to minimize your inconvenience by providing several transportation options. Depending on the circumstances, your dealer can offer you one of the following: Shuttle Service Participating dealers can provide you with shuttle service to get you to your destination with minimal...
  • Page 457: Additional Program Information

    Additional Program Information Courtesy Transportation is available during the Bumper-to-Bumper warranty coverage period, but it is not part of the New Vehicle Limited Warranty. A separate booklet entitled Warranty and Owner Assistance Information furnished with each new vehicle provides detailed warranty coverage information. Courtesy Transportation is available only at participating dealers and all program options, such as shuttle service, may not be available at every dealer.
  • Page 458: Collision Damage Repair

    To read this information, special equipment is needed and access to the vehicle or the device that stores the data is required. GM will not access information about a crash event or share it with others other than: • with the consent of the vehicle owner or, if the vehicle is leased, with the consent of the lessee, •...
  • Page 459: Repair Facility

    Aftermarket collision parts are also available. These are made by companies other than GM and may not have been tested for your vehicle. As a result, these parts may fit poorly, exhibit premature durability/corrosion problems, and may not perform properly in subsequent collisions. Aftermarket parts are not covered by your GM New Vehicle Limited Warranty, and any vehicle failure related to such parts are not covered by that warranty.
  • Page 460: If An Accident Occurs

    If an Accident Occurs Here is what to do if you are involved in an accident. • Try to relax and then check to make sure you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured.
  • Page 461: Managing The Vehicle Damage Repair Process

    Managing the Vehicle Damage Repair Process In the event that your vehicle requires damage repairs, GM recommends that you take an active role in its repair. If you have a pre-determined repair facility of choice, take your vehicle there, or have it towed there. Specify to the facility that any required replacement collision parts be original equipment parts, either new Genuine GM parts or recycled original GM parts.
  • Page 462: Service Bulletins

    In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you will notify us. Please call us at 1-800-521-7300, or write: Buick Customer Assistance Center P.O. Box 33136 Detroit, MI 48232-5136 In Canada, please call us at 1-800-263-3777 (English) or 1-800-263-7854 (French).
  • Page 463: Current And Past Model Order Forms

    Owner’s Information Owner publications are written specifically for owners and intended to provide basic operational information about the vehicle. The owner’s manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner’s Manual, and Warranty Booklet. RETAIL SELL PRICE: $35.00 Without Portfolio: Owner’s Manual only.
  • Page 464 NOTES 7-16...
  • Page 465 About Driving Your Vehicle ... ii Accessories and Modifications ... 5-3 Accessory Inflator ... 5-68 Accessory Power Outlet(s) ... 3-26 Adding Equipment to Your Airbag-Equipped Vehicle ... 1-86 Additives, Fuel ... 5-6 Add-On Electrical Equipment ... 5-100 Air Cleaner/Filter, Engine ... 5-18 Air Conditioning ...
  • Page 466 Audio System(s) (cont.) Navigation/Radio System, see Navigation Manual ... 3-114 Radio with Cassette and CD ... 3-87 Radio with CD ... 3-76 Radio with Six-Disc CD ... 3-100 Rear Seat Audio (RSA) ... 3-129 Setting the Time ... 3-75 Theft-Deterrent Feature ... 3-132 Understanding Radio Reception ...
  • Page 467 Chains, Tire ... 5-67 Change Engine Oil Message ... 3-55 Charging System Indicator Message ... 3-53 Check Engine Light ... 3-46 Tire Pressure System ... 5-59 Check Gas Cap Message ... 3-56 Checking Things Under the Hood ... 5-9 Chemical Paint Spotting ... 5-97 Child Restraints Child Restraint Systems ...
  • Page 468 Customer Assistance Information (cont.) Customer Assistance Offices ... 7-4 Customer Satisfaction Procedure ... 7-2 GM Mobility Reimbursement Program ... 7-5 Reporting Safety Defects to General Motors ... 7-14 Reporting Safety Defects to the Canadian Government ... 7-14 Reporting Safety Defects to the United States Government ...
  • Page 469 Electrical System (cont.) Underhood Fuse Block ... 5-103 Windshield Wiper Fuses ... 5-100 Engine Air Cleaner/Filter ... 5-18 Battery ... 5-37 Change Oil Message ... 3-55 Check and Service Engine Soon Light ... 3-46 Coolant ... 5-21 Coolant Heater ... 2-22 Coolant Temperature Gage ...
  • Page 470 Fuses Floor Console Fuse Block ... 5-101 Fuses and Circuit Breakers ... 5-101 Underhood Fuse Block ... 5-103 Windshield Wiper ... 5-100 Gage Engine Coolant Temperature ... 3-46 Fuel ... 3-50 Speedometer ... 3-39 Tachometer ... 3-40 Garage Door Opener ... 2-34 Gas, Check Cap Message ...
  • Page 471 Ignition Positions ... 2-20 Infants and Young Children, Restraints ... 1-48 Inflation -- Tire Pressure ... 5-57 Instrument Panel Overview ... 3-4 Switchbank ... 3-20 Instrument Panel (I/P) Brightness ... 3-16 Cluster ... 3-38 Interior Lamps ... 3-16 Interior Lamps Control ... 3-16 Jump Starting ...
  • Page 472 Locks (cont.) Power Door ... 2-9 Programmable Automatic Door Locks ... 2-10 Rear Door Security Locks ... 2-10 Loss of Control ... 4-16 Low Brake Fluid Warning Message ... 3-58 Low Fuel Warning Message ... 3-57 Low Oil Pressure Message ... 3-54 Low Washer Fluid Warning Message ...
  • Page 473 Message (cont.) Service Traction System Warning ... 3-51 Service Vehicle Soon ... 3-58 Traction Active ... 3-52 Mirrors Manual Rearview Mirror ... 2-31 Outside Convex Mirror ... 2-32 Outside Curb View Assist Mirror ... 2-31 Outside Heated Mirrors ... 2-32 Outside Power Mirror ...
  • Page 474 ® PASS-Key III Operation ... 2-18 ® PASS-Key III Security Message ... 3-56 Perimeter Lighting ... 3-19 Power Accessory Outlet(s) ... 3-26 Door Locks ... 2-9 Electrical System ... 5-100 Reduced Engine Message ... 3-53 Retained Accessory (RAP) ... 2-20 Six-Way Seats ...
  • Page 475 Removing the Spare Tire and Tools ... 5-71 Replacement Bulbs ... 5-49 Replacement, Windshield ... 5-49 Reporting Safety Defects Canadian Government ... 7-14 General Motors ... 7-14 United States Government ... 7-13 Restraint System Check Checking the Restraint Systems ... 1-87 Replacing Restraint System Parts After a Crash ...
  • Page 476 Service ... 5-3 Accessories and Modifications ... 5-3 Adding Equipment to the Outside of Your Vehicle ... 5-4 California Proposition 65 Warning ... 5-3 Doing Your Own Work ... 5-4 Engine Soon Light ... 3-46 Publications Ordering Information ... 7-14 Traction System Warning Message ...
  • Page 477 Theft-Deterrent Systems ... 2-15 Content Theft-Deterrent ... 2-15 ® PASS-Key III ... 2-17 ® PASS-Key III Operation ... 2-18 Tilt Wheel ... 3-6 Tires ... 5-51 Aluminum or Chrome-Plated Wheels, Cleaning ... 5-96 Buying New Tires ... 5-62 Chains ... 5-67 Changing a Flat Tire ...
  • Page 478 Vehicle Control ... 4-7 Damage Warnings ... iv Design ... 4-3 Loading ... 4-31 Service Soon Message ... 3-58 Symbols ... iv Vehicle Data Collection and Event Data Recorders ... 7-9 Vehicle Identification Number (VIN) ... 5-99 Service Parts Identification Label ... 5-99 Vehicle Personalization ...

Table of Contents

Save PDF