Getting Started; Getting To Know Your Packtalk Bold; Charging The Packtalk Bold - Cardo Systems PACKTALK BOLD Manual

2. GETTING STARTED

2.1 GETTING TO KNOW YOUR PACKTALK BOLD

2.2 CHARGING THE PACKTALK BOLD

Make sure that your PACKTALK BOLD battery is charged for at least 4 hours before initial use.
To charge the unit:
1. Using the supplied USB cable, connect your computer or wall charger to the USB port on your PACKTALK
BOLD.
Charging with the wall charger is faster than via a computer USB port.
●
Charging your unit switches it off automatically. To use your unit while it is being charged, switch it on.
●
(see Switching Your Unit On/Off
While charging, the LED indicates the charging status as follows:
Red LED on — charging
●
Red LED off — charging complete
●
TIP: You can check the battery charge at any time by saying "Hey Cardo, battery status."
on page 6).
5