Setting The Default Mobile Phone; Using Parallel Audio Streaming - Cardo Systems PACKTALK BOLD Manual

AGC and voice control performance vary based on environmental conditions, including riding speed,
helmet type and ambient noise. For improved voice control performance, minimize the wind impact on the
microphone by closing the visor and using the large microphone sponge.

6.1 SETTING THE DEFAULT MOBILE PHONE

If you paired your unit to two mobile phones, you must set one of them as the default phone for outgoing calls.
If you do not set a default phone, the phone that you first paired with your unit is automatically set as the
default phone.
To set the default phone:
During a mobile call, press
●

6.2 USING PARALLEL AUDIO STREAMING

With parallel audio streaming, you can hear GPS instructions during a mobile or Bluetooth intercom call, or
while listening to other audio sources, such as music or FM radio.
Parallel audio streaming may not work properly with some iOS devices (i.e., music player or GPS navigator)
due to connected device limitations.
Your PACKTALK BOLD sets the various audio sources to either foreground (volume remains the same) or
background (volume reduced) as described in the following table:
Mobile Phone 1/2
Foreground Foreground
1
Foreground
Foreground
Foreground
Foreground
1
If you add an intercom call to a mobile phone call creating a conference call, the volume for both audio
sources is the same.
2
If you make two intercom calls simultaneously creating an intercom conference call, the volume for both audio
sources is the same.
3
If you make two intercom calls simultaneously creating an intercom conference call, you cannot hear the
mobile phone or GPS.
4
If you play music only, the music volume is not reduced.
5
If you play the FM radio only, the FM radio volume is not reduced.
for 5 seconds.
GPS Intercom 1
1
Foreground
Foreground
Foreground
Foreground
2,3
Foreground
Intercom 2
2,3
Foreground
25
Music FM Radio
Background
Background
Background
Background
Background
4
Foreground
Foreground
5