Cardo Systems PACKTALK BOLD Manual page 7

4. When your PACKTALK BOLD appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros).
The phone confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
To pair Bluetooth channel 2 to another Bluetooth device:
1. Enable Bluetooth on the device (for example, your mobile phone, GPS device, or music player).
2. On the unit in standby mode, press
3. Tap twice. The LED flashes red and green.
4. If you are pairing a GPS device, roll the control wheel inward.
The LED flashes slower.
5. On the device you are pairing, search for Bluetooth devices.
6. When your PACKTALK BOLD appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros).
The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
●
If you have paired two different mobile phones directly to your PACKTALK BOLD, set one as default for
●
making calls (see
Not all Bluetooth mobile phones broadcast Bluetooth Stereo music (A2DP) even if the phone has an
●
MP3 player function. Consult your mobile phone's user manual for more information.
Not all Bluetooth GPS devices allow connection to Bluetooth audio devices. Consult your GPS User
●
Manual for more information.
To cancel the pairing process:
Press for 2 seconds.
●
The LED stops flashing red and blue/green.
To reset all Bluetooth device pairing:
1. Press for 5 seconds.
2. Press and for 2 seconds.
The LED flashes purple 5 times, confirming that pairing has been reset.
for 5 seconds. The LED flashes red and blue.
Setting the Default Mobile Phone on page 25).
7