GeChic ON-Lap 2101H User Manual page 10

4
◆ Adjust viewing angles
Fit the tenon on the buckle to the red line as
shown above. When attaching to the
the viewing angle is about 67 degrees.
(2)Please follow the steps below to put the On-Lap 2101H monitor into the
monitor carrying bag (21A1).
◆ Step 1 ◆
Turn off the monitor and unplug all the
cables. Then, as shown on the right, hold
two sides of the bottom of the monitor by
both hands. Put the monitor into the mon-
itor carrying bag with the glass side fac-
ing down.
◆ Step 2 ◆
Unfasten the tenon on the magnet
Buckle, and then lay flat the I/O base
and the aluminum alloy stand to the
back of the monitor.
◆ Step 3 ◆
As shown on the right, fasten the monitor with
the belt. Put the cables and the power supply
adapter into the inner bag, and then zip it up.
Fit the tenon on the magnet buckle to the red
line as shown above. When attaching to the
slot,
1
slot, the viewing angle is about 73 degrees.
○
2