Figure 11
1. Self-tapping screw (5/16 x 3/4 inch)
4.
Install the bent, flared end of a rod into the keyed
slot in the left side of the machine frame, and
move the rod rearward to seat it in the frame
(Figure
12).
Note:
Repeat this step for the right side of the
machine.
Figure 12
5.
Insert the bent ends of the rods into the
attachment mount as shown in
secure the end of each rod with a washer and
hairpin cotter.
Installing the Latch Rod
Parts needed for this procedure:
Procedure
Install the latch rod with a hairpin cotter
g300206
1. Hairpin cotter
Assembling the Bagger Top
Parts needed for this procedure:
g300207
Procedure
Figure 12
and
1.
2.
9
6
1
Latch rod
1
Hairpin cotter
Figure 13
7
1
Bagger top
1
Bagger screen
Turn the bagger top over.
Install the screen as shown in
it slopes down toward the collection bags.
Note:
Make sure the screens snap into place
and the tabs engage the bagger top.
(Figure
13).
g033027
2. Latch rod
Figure 14
and that