Connecting With The Discharge Tube; Discharge Tube - Toro 79412 Operator's Manual

Figure 22
7. Hook the flexible latch on the chute to the
retaining clasp welded on the mower deck
(Figure 23).
Figure 23
1. Chute
2. Retaining clasp
g300375
g299268
3. Flexible latch
10
Connecting with the

Discharge Tube

Parts needed for this procedure:
1 Discharge tube
Procedure
1. Slide the curved end of the discharge tube into
the opening in the bagger top
1. Discharge tube
2. Opening in bagger top
3. Discharge tube, flared end
2. Slide the flared end of the discharge tube over
the end of the chute. Move the rubber retaining
strap on the chute snaps over the peg on the
discharge tube to secure it
3. After the bagger installation, install the wire onto
the spark plug(s).
13
(Figure 24).
Figure 24
4. Peg
5. Rubber strap
(Figure 24).
g010641