Headlamp High/Low-Beam Changer; Flash-To-Pass; Windshield Wipers - Buick 2005 Century Owner's Manual

Headlamp High/Low-Beam Changer

To change the headlamps from low beams to high
beams, or high to low, pull the multifunction lever until
a click is heard, then release it.

Flash-to-Pass

This feature lets you use your high-beam headlamps to
signal the driver in front of you that you want to pass.
It works even if the headlamps are off. Pull the turn
signal lever toward you a little, but not so much that you
hear a click.
If the headlamps are off or on low-beam, the high-beam
headlamps will turn on. They will stay on as long as
you hold the lever toward you. The high-beam indicator
on the instrument panel cluster will come on. Release
the lever to return it to the normal operation.
3-8
This indicator light on the
instrument panel cluster
will come on while the
high-beam lamps are on.

Windshield Wipers

To operate the windshield wipers turn the band located
on the multifunction lever upward or downward.
WIPER: Turn this band to control the windshield wipers.
OFF: Turn the band to OFF to turn off the
windshield wipers.
LO (Low Speed): Turn the band away from you
to LO and past the delay settings for steady wiping at
low speed.
HI (High Speed): Turn the band away from you, to HI,
and past the delay settings for steady wiping at a
high speed.
(Delayed Wiping): Turn the band away from you,
just past OFF, to one of the five delayed settings,
to choose the length of intervals between each wiping
cycle. The further the band is turned upward, toward LO,
the shorter the delay will be. Select one of these
settings for light rain or snow.