Buick 2005 Century Owner's Manual page 162

To scan tracks, press and hold either SEEK arrow for two
seconds until SCAN appears on the display. You will hear
a beep. The CD will go to the next track, play for a few
seconds, then go on to the next track. The sound will
mute and SCAN and the track number will appear on the
display. The CD will only scan forward. Press either
SEEK arrow again to stop scanning.
BAND: Press this button to listen to the radio when a
cassette tape or CD is playing. The inactive cassette or
CD will remain safely inside the radio for future listening.
CD TAPE: Press this button to play a cassette tape
or a CD when listening to the radio.
Z
(Eject): Press this button to eject a tape.
Eject may be activated with either the ignition or
radio off. CDs may be loaded with the ignition or
radio off if you press this button first.
3-62
CD Messages
CHECK CD: If this message appears on the radio
display, it could be for one of the following reasons:
•
It is very hot. When the temperature returns to
normal, the CD should play.
•
You are driving on a very rough road. When the
road becomes smooth, the CD should play.
•
The CD is dirty, scratched, wet, or upside down.
•
The air is very humid. If so, wait about an hour
and try again.
•
There may have been a problem while burning
the CD.
•
The label may be caught in the CD player.
If the CD is not playing correctly, for any other reason,
try a known good CD.
If any error occurs repeatedly or if an error cannot be
corrected, contact your dealer. If your radio displays an
error message, write it down and provide it to your
dealer when reporting the problem.