Life Span CT-02 Owner's Manual page 9

STEP 2:
1. Connect the Sensor wire (43) well with Extension wire (44).
2. Connect the Tension cable (42) well with wire of Tension controller (45). See below for
detailed guide.
3. Attach the Handlebar post (4) to the Main frame (1) with Inner hex bolt (38), Arc washer
(36).
2 a) Rotate the Tension Controller to increase the
length of the Tension Cable
2 b) Lock the Tension Cable Eye into the Cable
Lock as per image ① below.
2 c) Lift the Tension Cable up ,then place the
Tension Cable into the Slot as shown by the
arrows as per images ②③ below.
9
CT-02