Page 1
ZOOM USER’S MANUAL This is HIGH-POWER item; please DO NOT USE THE SAME OUTLET WITH OTHER HIGH-POWER HOUSEHOLD APPLIANCE like air-conditioning etc. Please choose an outlet exclusively for the machine and make sure the fuse is 10A. Product may vary slightly from the item pictured due to model upgrades.
The treadmill is intended for in-home use only and not suitable for long time running. To disconnect, turn all controls to the off position, remove the safety key, and then remove the plug from the outlet. LIFESPAN ZOOM Page 2...
This unit starts with a very low speed. Simply standing on the belt during slow acceleration is proper till you have learned to operate this machine. Always hold on to handrail while making control changes. LIFESPAN ZOOM Page 3...
Meter Panel provides easy readability of the parameters. Its speed range is 1.0-20km/h. console panel handrail safety key upright running belt footpad power switch LIFESPAN ZOOM Page 4...
Program: 36 pre-set programs Time display range:0:00∽99:59 (minutes : seconds); Distance display range: 0.00~9.99km Calorie display range: 0.00~999 calorie Machine size (L*W*H): 1930*850*1360mm It is no assembly, with speed, incline keys in the handrail, MP3 player, two music speakers. LIFESPAN ZOOM Page 5...
Press “mode”, it comes to automatic operating mode. (4) “up” key Press “up” key, the incline increases 1levels per time. (5) “time, distance, calorie and pulse” window “time, distance, calorie and pulse” window displays time, distance, calorie and heart rate. LIFESPAN ZOOM Page 6...
Ensure that the safety key is installed, as the treadmill will not power on without it. When the power is turned on, all the lights on the display will light for a short time. LIFESPAN ZOOM Page 7...
The Pulse (Heart Rate) console window will display your current heart rate in beats per minute during the workout. You must use both stainless steel sensors to display your pulse. Pulse value displays anytime the upper display is receiving a Grip Pulse signal. 4.7 Calorie Display LIFESPAN ZOOM Page 8...
After every one minute program and speed can be altered manually or automatically. 3 Seconds before the ending of program a buzzer will sound three times, then the running belt will come to a stop. LIFESPAN ZOOM Page 9...
Page 22
MAINTENANCE Reasonable cleaning/lubricating should be made to extend the life time of this unit. Performance is maximized when the belt and mat are kept as clean as possible. LIFESPAN ZOOM Page 21...
Page 23
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill. • Return the treadmill to its previous position. EVERY MONTH -IMPORTANT! • Inspect all assembly bolts of the machine for proper tightness. LIFESPAN ZOOM Page 22...
Page 24
A mild soap and water solution along with a nylon scrub brush will clean the top of the textured belt. This task should be done once a month. Allow to dry before using. LIFESPAN ZOOM Page 23...
Page 25
3. Periodically lubricate the front and rear rollers to keep them at there peak performance. If the treadmill belt/deck/roller is kept reasonably clean it is possible to expect over 1200 hours before additional re-lubing is necessary. LIFESPAN ZOOM Page 24...
2. Check that the speed sensor and magnet are in correct alignment and that there are no obstructions on the magnet. (The magnet can be found on the front roller near the motor belt). LIFESPAN ZOOM Page 26...
The pulse sensors are not medical devices. Various factors, including the user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are intended only as an exercise aid in determining heart rate trends in general. LIFESPAN ZOOM Page 27...
Please visit the following link to complete the product warranty form online. Please visit http://warrantyform.lifespanfitness.com.au/ PLEASE NOTE: YOUR WARRANTY IS ONLY VALID IF YOU CAN PROVE YOU ARE THE ORIGINAL PURCHASER ON THIS ITEM (i.e. a copy of the receipt, invoice, delivery date or internet confirmation). LIFESPAN ZOOM Page 32...