Table of Contents
Advertisement
2.6
Create and Run Your First Project
If it is your first time using Techman Robot, there will be no projects in your robot. You can create your first
project based on the instructions of this section. However, you have to completely observe this section. The
project objective is to move back and forth between 2 points (P1 and P2). The following shows the settings:
Step1
Step2
Step3
The project name can only consist of the alphabet in upper/lower-case (A~Z), numbers (0~9)
and underscore _.
Note
Please check operating mode of the robot,if it not the Manual Mode, please
reference "2.5 M/A Mode and Hand Guide" to switch to Manual Mode.
Click Project in the menu and go to the project editing screen
Select "Create a new project" and enter your project name
II Quick Guide 2.6. Create and Run Your First Project
27
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TM5 and is the answer not in the manual?
Questions and answers