Advertisement
Table of Contents
SOMFY Keytis NS2RTS
SOMFY Keytis NS2RTS - Keytis NS4RTS
Programming of your new remote control
ming of your new remote control:
Receiver type 1 (fig.1):
1. Open the casing of your receiver. It is located next to your motor.
Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board, press the programming button «
On the receiver circuit board, press the programming button « Prog 1 » (fig 1) until the LED
light L1 on the receiver illuminates.
the receiver illuminates.
3. Press a button on your new remote control. Let it go. The LED light o
then turns off (4).
4. Wait 10 seconds.
5. Your new remote control is programmed.
Your new remote control is programmed.
Receiver type Axroll (fig.2) :
1. Open the casing of your receiver.
Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board, press on the arrows until you get to the position P.8 on the
On the receiver circuit board, press on the arrows until you get to the position P.8 on the
On the receiver circuit board, press on the arrows until you get to the position P.8 on the
digital screen.
3. After a second, the position 0.0 appears on the screen which corresp
a second, the position 0.0 appears on the screen which corresponds to the open/close
function of your door.
4. Simultaneously press the button you wish to program on your new remote control and the +
Simultaneously press the button you wish to program on your new remote control and the +
Simultaneously press the button you wish to program on your new remote control and the +
button in your receiver for three seconds. Two dashes appear on the screen. Let the buttons
button in your receiver for three seconds.
go.
5. Wait 10 seconds.
6. Your new remote control is programmed.
remote control is programmed.
http://www.remotecontrol-express.com
Programming Manual
your new remote control. Let it go. The LED light on the receiver blinks and
express.com
- TEL : +44 (0) 207 399 7782 - FAX : +44 (0) 207 927 3151
Keytis NS4RTS
Two dashes appear on the screen. Let the buttons
fig 2
(fig 1) until the LED
the receiver blinks and
onds to the open/close
+44 (0) 207 927 3151
Advertisement
Table of Contents
Related Manuals for SOMFY Keytis NS2RTS
Summary of Contents for SOMFY Keytis NS2RTS
- Page 1 Programming Manual SOMFY Keytis NS2RTS SOMFY Keytis NS2RTS - Keytis NS4RTS Keytis NS4RTS fig 2 Programming of your new remote control ming of your new remote control: Receiver type 1 (fig.1): 1. Open the casing of your receiver. It is located next to your motor.
- Page 2 Programming Manual Receiver type Passeo (fig.3) : fig 3 1. Place your new remote control on the target graved on the hood of your receiver. your new remote control on the target graved on the hood of your receiver. your new remote control on the target graved on the hood of your receiver. It is located next to your motor.
Need help?
Do you have a question about the Keytis NS2RTS and is the answer not in the manual?
Questions and answers