Maintenance; Change Password; Load Default - Planet ICS-11 Series User Manual

4.7 Maintenance

Use the Port Menu to display or configure the Serial Server's ports. This section includes the page that displays current port
configurations. Ports can also be configured here.

4.7.1 Change Password

After logging in to the serial server, user can make changes from the "Change Password" page. The Change Password screen
in Figure 4-7-1 appears.
The page includes the following fields:
Object
• New Password
• Confirm Password

4.7.2 Load Default

A user can reset the configuration of the serial server on this page. The new configuration will applied after restarting system.
The Load Default screen in
Buttons
: Click to reset to default.
Figure 4-7-1: Change Password Page Screenshot
Description
A new password. It allows strings like A-Z, a-z, _ ,0-9
Please enter the user's new password here again to confirm.
Figure 4-7-2 appears.
Figure 4-7-2: Reset to Default Page Screenshot
User's Manual of ICS-11x Serial Device Server Series
67