Maintenance; Change Password; Load Default - Planet ICS-2102ST User Manual

4.7 Maintenance

Use the Port Menu to display or configure the Industrial Industrial Serial Server's ports. This section includes the page that
displays current port configurations. Ports can also be configured here.

4.7.1 Change Password

After logging in to the industrial serial server, user can make changes from the "Change Password" page. The Change
Password screen in Figure 4-7-1
The page includes the following fields:
Object
• New Password
• Confirm Password

4.7.2 Load Default

A user can reset the configuration of the industrial serial server on this page. The new configuration will applied after restarting
system. The Load Default screen in
Buttons
: Click to reset to default.
User's Manual of ICS-2x00T Serial Device Server Series
appears.
Figure 4-7-1: Change Password Page Screenshot
Description
A new password. It allows strings like A-Z, a-z, _ ,0-9
Please enter the user's new password here again to confirm.
Figure 4-7-2 appears.
Figure 4-7-2: Reset to Default Page Screenshot
69