Community Playthings The Community Loft 1 Corner Lof Product Manual page 19

2
If you have circular plugs between plat-
forms, insert a flat screwdriver from below
to pry up the plug. Then, remove any half-
circle plugs.
This picture shows platforms removed for
clarity. Remove platforms only after plugs
have been removed.
5
Remove the platforms and stairs. Then
take apart the bottom layer of the loft.
Now you can try another pattern, and give
the room a whole new look!
Model 1 Corner Loft
3
Remove the top connector rings from one
panel and lift it out of the bottom rings.
Do not take all the top rings off at once;
this could cause instability and falling
panels. Continue around removing one
panel at a time.
19