Community Playthings The Community Loft 1 Corner Lof Product Manual page 11

12
Use tall panels to create the second lay-
er, following the configuration you have
chosen. Add connector rings as you go
so each panel is captured by four rings
and will not fall down. You may want to
stand on the platform to do this.
14
Screw a cap onto each post to lock con-
struction together. You will hear a click-
ing sound as you turn the cap; screw it
all the way down.
Model 1 Corner Loft
13
Check all joints. Make sure all pan-
els are where you want them to be.
Then if you have a hole between two
platforms, use a circular plug to fill it.
Step on the plug to lock it in place.
15
Check that all post feet are firmly on the
floor. If a post needs lengthening, turn
the rubber foot clockwise until the post
is anchored.
11