Taillamps, Turn Signal, and
Stoplamps
A
A
1. Open the trunk.
2. If your vehicle is equipped with a convenience net,
3. Remove the three plastic wing nuts (A).
remove it.
There is one wing nut located on the outside of
the carpet. The other two are located underneath
the carpet.
4. Pull the taillamp housing (B) away from the body of
the vehicle.
5. Squeeze the tab on the socket and turn the socket
counterclockwise.
6. Pull out the socket.
7. Pull the old bulb out of the socket. (There are two
8. Push in a new bulb.
bulbs on each taillamp.)
9. Reverse these steps to reinstall the lamp assembly.
5-54