Buick 2003 Century Owner's Manual page 78

Hide thumbs Also See for 2003 Century:
Table of Contents

Advertisement

Delayed Locking
Delayed locking allows the doors to be locked while the
passengers are exiting the vehicle. This feature also
allows a brief time period for you to re-enter the vehicle
after the doors have been closed and locked. Delayed
locking is user programmable for enabling or disabling
the feature.
Delayed locking is activated when a door lock switch is
pressed while the key
is
not in the vehicle's ignition, and a
door is open. The door lock switch may be either the lock
switch on the door or on the remote
keyless entry
transmitter. See "Remote Keyless Entry System
Operation" earlier in this section for more details. The
doors do not lock when the lock switch is pressed, but
instead, three chimes are heard. These chimes indicate
that the delayed locking function has been activated.
You have three actions possible once delayed locking
is activated:
0
Cancel the delayed locking by pressing the unlock
switch or bv fullv insertinq the kev in the iqnition.
Override the delayed locking feature and lock the
doors immediately by pressing the lock switch a
second time.
0
Let the delayed locking feature complete the locking
of the vehicle;
If you wish to let the delayed locking feature complete
the locking of the vehicle, no additional action is
required. The delayed locking feature will lock the doors
automatically after all the doors have been closed for
a period of five seconds. During this five second period,
any door may be reopened, at which time the three
possible actions shown above are again available.
You may also customize your vehicle to activate the
delayed locking feature as described previously,
or
you
may choose to completely disable the feature at all
times. If disabled, the power door locks will activate
immediately when a power door lock switch is pressed.
The enabled/disabled state of the delayed locking
feature will be toggled when you perform the following
sequence:
1. Close the doors.
2. Move the ignition key to the RUN position.
3. Apply your regular brakes.
4. Press and hold the power door unlock switch. While
hn!rJIng the clmr
L!"!C)Ck'S\!!i!Ch,
mn'E
fhP
shift
!PF3-
out of and back into PARK (P).
2-7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents