Appendix - Trane mP30 Installation Operation & Maintenance

UG30 CONTROL
GLb G
ENERAL
H1 Unit model
H2 Number of connected units
H3 Address of connected unit
H4 Rotation time between all connected units
H5 Functioning mode of chilled water outputs OUT1-OUT2
H6 Functioning mode of hot water outputs OUT3-OUT4
H7 3 point valve excursion time end dumper FC
H8 Humidifier present
H9 Dehumidification present
HA Digital output function DO7
Hb Output function Y2
HC Functioning of B2 sensor
Hd Functioning of B3 sensor
HE Digital input ON/OFF
HG Delay at power up
HH USER Password
Hi Keyboard lock-out
HL Parameters setting
Ho Serial address for supervision network
HP Serial baud rate for supervisor
Cloc C
LOCK
rt Hour-bands setting
(**)
: "USER" password contained in envelope enclosed with manual
With the control programme on, press the button
After having performed this first step:
- Set the default values, see above paragraph "Default Values";
- Configure the devices and the sensors fitted according to the type of unit, adjust the set-points that needed to
be different from the default values.
mP30-UG30 - Rev. 1.5 - Date: 18-03-2004
MEMORY RESET
APPENDIX – mask flowcharts
EN
Type Minimu
m
FACTORY 0
FACTORY 0
FACTORY 1
FACTORY 0
FACTORY 1
FACTORY 0
FACTORY 0
FACTORY 0
FACTORY 0
FACTORY 0
FACTORY 0
FACTORY 0
FACTORY 0
USER 0
USER 0
USER 0
USER 0
FACTORY 0
USER 1
USER 1
Type Minimu
m
USER 0
in order to reset the parameter values.
INSTRUCTION MANUAL
maximum Measurement
unit
2 flag
6 flag
6 flag
250 ore
5 flag
4 flag
600 sec
1 flag
8 flag
3 flag
2 flag
3 flag
1 flag
2 flag
300 sec
200 -
1 flag
3 flag
200 -
5 flag
maximum Measurement
unit
2 flag
Default
0 (DX-DX/S)
1,2 (CW-
CW/S)
0
1...6
1...6
168
3 (CW)
1 (DX/S)
1 / 2 / 5 (DX)
0 / 3 / 4
(CW-DX)
0 / 1 / 3
(CW/S-DX/S)
150
0 / 1
3 (CW)
8 (CW/S)
0 / 2 (DX)
5 (DX/S)
0 (CW) / 3
2 (CW/S) / 3
1 (DX) / 3
2 (DX/S) / 3
0
0
0
0 / 1 / 2
0
22 (**)
0
1
1
5
Default
0
43 (44)