GIGA-BYTE TECHNOLOGY X570S AORUS MASTER User Manual page 51

& Resume by Alarm
Determines whether to power on the system at a desired time. (Default: Disabled)
If enabled, set the date and time as following:
Wake up day: Turn on the system at a specific time on each day or on a specific day in a month.
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
& High Precision Event Timer
Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled)
ƒ IO Ports
& Initial Display Output
Specifies the first initiation of the monitor display from the installed PCI Express graphics card.
PCIe 1 Slot
PCIe 2 Slot
PCIe 3 Slot
& Integrated Graphics
(Note)
Enables or disables the onboard graphics function.
Auto
Forces
Disabled
& UMA Mode
(Note)
Specify the UMA mode.
Auto
UMA Specified
UMA Auto
UMA Game Optimized Adjusts the frame buffer size based on the total system memory size.
This item is configurable only when Integrated Graphics is set to Forces.
(Note) This item is present only when you install a CPU that supports this feature.
S ets the graphics card on the PCIEX16 slot as the first display. (Default)
S ets the graphics card on the PCIEX8 slot as the first display.
S ets the graphics card on the PCIEX4 slot as the first display.
The BIOS will automatically enable or disable the onboard graphics
depending on the graphics card being installed. (Default)
Enables the onboard graphics.
Disables the onboard graphics.
Lets the BIOS automatically configure this setting. (Default)
Sets the UMA Frame Buffer Size.
Sets the display resolution.
- 51 - BIOS Setup