Cannon miniPV Installation Manual

2139 High Tech Road | State College, PA 16803 | USA
814-353-8000 | 800-676-6232
sales@cannoninstrument.com | cannoninstrument.com
- 4 -
2139 High Tech Road • State College, PA • 16803 • USA
CANNON miniPV Installation Guide
®
Cannon Instrument Company
THANK YOU for your purchase of the miniPV automatic viscometer
Purpose
from Cannon Instrument Company. This guide is designed to
provide information about the installation of the miniPV. Refer to
the miniPV Instruction & Operation Manual for more information.
1. Unpack the miniPV viscometer
Remove all components from the shipping container(s).
CAUTION
Do NOT lift the miniPV instrument by the modular side panels ("ears"). Always
support the weight of the unit from the BASE.
• Remove all packing material from the components.
• Verify reception of shipped materials by comparing equipment items with packing/
parts lists. Report any missing items to Cannon Instrument Company
immediately.
• Inspect each component for signs of damage. Report damages to the shipper and
Cannon Instrument Company immediately.
• Retain all packing materials until the instrument is connected and functioning
properly.
• If any components must be returned to CANNON, the damaged items must be
packaged in the original shipping container. Refer to the Warranty section of the
Instruction & Operation manual for instructions on returning defective equipment.
Customers outside the United States should contact their local CANNON dealer
for return procedures.
• Review the operator safety information in the beginning of the miniPV Instruction
& Operation Manual.
• Verify electrical specifications for MAINS power in the miniPV Instruction &
Operation Manual.
CANNON
Cannon Instrument Company
2139 High Tech Road • State College, PA • 16803 • USA
miniPV viscometer
Installation Guide
miniPV Installation Guide
®
- 1 -