Cannon miniPV-X Installation Manual

2139 High Tech Drive
State College, PA 16803 | USA
814-353-8000 | 800-676-6232
service@cannoninstrument.com
cannoninstrument.com
CANNON® miniPV-X Installation Guide
- 4 -
2139 High Tech Road
State College, PA, 16803 | USA
800-676-6232 | 814-353-8000
miniPV-X viscometer Installation Guide
THANK YOU for your purchase of the miniPV-X automatic viscometer from CANNON Instrument
Company. This guide is designed to provide information about the installation of the miniPV-X.
This is designed to be used along with the miniPV-X Instruction & Operation Manual.
1. Unpack the miniPV-X viscometer
Remove all components from the shipping container(s).
CAUTION Do NOT lift the miniPV instrument by the modular side panels ("ears").
Always support the weight of the unit from the BASE.
• Remove all packing materials from the components.
• Verify reception of shipped materials by comparing equipment items
with packing/parts lists. Report missing items to Cannon Instrument
Company immediately.
Inspect each component for signs of damage. Report damages to the
•
shipper and Cannon Instrument Company immediately.
Retain all packing materials until the instrument is connected and
•
functioning properly.
• If any component(s) must be returned to Cannon Instrument Company,
the damaged item(s) should be packaged in the original shipping
container. Refer to the final page of this guide for instructions on
returning defective equipment. Customers outside the United States
should contact the local Cannon dealer for procedures on returning
products to Cannon.
Review operator safety information in the miniPV-X Instruction &
•
Operation Manual
Verify electrical specifications for MAINS power in the miniPV-X
•
Instruction & Operation Manual.
CANNON® miniPV-X Installation Guide
State College, PA, 16803 | USA
800-676-6232 | 814-353-8000
2139 High Tech Road
- 1 -