Wi-Fi Hotspot In The Rear; Barring Outgoing Calls; Resetting The Settings; Canceling All Call Barrings - BMW X3 2021 Owner's Manual

Go to the menu
1. "Security"
2. "Ok"
3. "Call barring"
4. "Ok"

Barring outgoing calls

Outgoing calls can be prevented:
▷ All calls except emergency calls.
▷ All international calls.
▷ All international calls except home country.
1. "Outgoing calls"
2. "Ok"
3. "All calls", "International calls" or "Int. exc.
homectry"
4. "Ok"
5. "Activate", "Deactivate" or "Status"
6. Enter the password.
7. "Ok"
Incoming calls
Incoming calls can be prevented:
▷ All calls.
▷ All international calls.
1. "Incoming calls"
2. "Ok"
3. "All calls", "Int'l calls"
4. "Ok"
5. "Activate", "Deactivate" or "Status"
6. Enter the password.
7. "Ok"

Canceling all call barrings

1. "Deactivate all"
2. Enter the password and confirm with "Ok".

Resetting the settings

All settings of the snap-in adapter are reset to
the factory settings. The WLAN configuration
Online Edition for Part no. 01405A39127 - VI/21
Rear phone
must be performed again and the Bluetooth®
connections must be reestablished.
/ Press the buttons simultane‐
ously.

Wi-Fi hotspot in the rear

Principle
A WLAN-capable device such as a laptop can be
connected to the snap-in adapter wirelessly via a
WLAN connection.
Functional requirement
▷ The SIM card has been inserted into the
snap-in adapter and the snap-in adapter is
ready for operation.
▷ The device is switched on and ready for op‐
eration.
▷ The WLAN connection on the device is
switched on.
▷ Access data of the network service provider
are known: APN, user name, password.
The APN, i.e., the access point of the net‐
work service provider, is different when
changing to another mobile phone network,
for instance when traveling abroad. Ask the
service provider which APN is used in an‐
other mobile phone network.
▷ The WPA2 code and the name of the snap-in
adapter, SSID, are known. This data can be
found at the bottom of the snap-in adapter.
Connecting the device with the
snap-in adapter
1. Check whether the lower LED above
the WLAN button is flashing green.
If the LED is not flashing green:
COMMUNICATION
85