Table of Contents
Advertisement
Available languages
Available languages
3.0 locating appliance
locating appliance
EN
WARNING
!
•
Due to high temperatures, this electric appliance should be located out of traffic. Keep combustible materials
such as furniture, pillows, bedding, papers, clothes and curtains at least 36" (91.4cm) from the front of the
appliance.
•
Never locate this electric appliance where it may fall into a bathtub or other water container.
•
Wear safety gloves and safety glasses for protection during installation and maintenance.
•
To prevent contact with sagging or loose insulation, the electric appliance must not be installed against vapor
barrier or exposed insulation. Localized overheating could occur and a fire could result.
•
Do not expose the electric appliance to the elements (such as rain, etc.).
3.1
unpacking and testing the appliance
Carefully remove the appliance from the box and remove the support brackets. Prior to installing the appliance,
remove all packaging material and test to make sure the appliance operates properly by plugging the power
supply cord into a conveniently located 120V, 15Amp minimum grounded outlet.
3.2
grounding the appliance
This appliance is for use on 120 volts. The cord has a plug as shown in (A). An adapter as shown in (C) is available
for connecting three-blade grounding type plugs to two-slot receptacles, as shown in (B).
The green grounding plug extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.
To disconnect appliance, turn controls to off, then remove plug from outlet.
(A)
note:
Must be connected to a dedicated 15Amp circuit. The use of an extension cord is not permitted.
8
W415-1755 / 05.03.17
Grounding Methods
Metal Screw
Cover of
grounded
outlet box
(B)
Grounding Pin
Not allowed in Canada
Adapter
(C)
Grounding Means
51.1
Advertisement
Chapters
Table of Contents
