Rs-232C; Communication Specifications - Sony VPL-BW7 Protocol Manual

Video projector
Hide thumbs Also See for VPL-BW7:
Table of Contents

Advertisement

1. Introduction
This protocol manual describes the basic configuration and basic operations of various commands used
for projector. Projector can be controlled using the commands provided in "Appendix". Using an external
CONTROLLER , etc., inputs can be switched and the power can also be turned on and off. In the follow-
ing paragraphs, "CONTROLLER" means an external device such as a PC which controls projector using
these commands.

2. RS-232C

2-1. Communication Specifications

<RS-232C Communication Signal>
. Full duplex communication channels (Flow control not performed.)
. Start-stop synchronism system
. Baud rate: 38.4 kbps (bits per second)
. The bit configuration is defined as follows.
1 START Bit + 8 DATA Bits + 1 PARITY Bits + 1 STOP Bit
START
D0
D1
D2
D3
D4
D5
D6
D7
PARITY
STOP
BIT
(LSB)
(MSB)
(EVEN)
BIT
Even Parity ... The sum of ones in D0 to D7 and parity is even.
1
VPL-BW5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpl-bw5Vpl-es3

Table of Contents