2.
COMMUNICATION SPECIFICATIONS
2-1. RS-232C COMMUNICATION SIGNAL
. Full duplex communication channels (Flow control not performed.)
. Start-stop synchronism system
. Baud rate: 38.4 k, 19.2 k, 9600 bps (bits per second)
. The bit configuration is defined as follows.
. RS-422A and PJ COM have the same bit configuration.
1 START Bit + 8 DATA Bits + 1 PARITY Bit + 1 STOP Bit
START
D0
D1
D2
D3
D4
D5
D6
D7
PARITY STOP
BIT
(LSB)
(MSB)
(EVEN)
BIT
EVEN Parity.....Total number of "1"s from D0 to D7 is an even number.
2-2. RS-422A COMMUNICATION SIGNAL
. Full duplex (4-wire) communication channels
. Start-stop synchronism system bit serial word serial digital signal
. Baud rate: 38.4 k, 19.2 k, 9600 bps (bits per second)
. Refer to "2-1. RS-232C Communication Signal" for details on the bit configuration.
2-3. PJ COM COMMUNICATION SIGNAL
. Half duplex (4-wire) PROJECTOR dedicated communication channels
. Start/stop system bit serial word serial digital signal
. Baud rate: 38.4 k, 19.2 k, 9600 bps (bits per second)
. Refer to "2-1. RS-232C Communication Signal" for details on the bit configuration.
VPL-FE100U/FE100E/FE100M
2