Advertisement
GB
EMU00157
TILT SUPPORT LEVER
To keep the outboard motor in the tilted-
up position, lock the tilt support lever to
the clamp bracket.
403033
EMU01180
TOP COWLING LOCK LEVERS
To remove the engine top cowling, pull
up the front and rear lock levers. Then lift
off the cowling. When replacing the cowl-
ing, check to be sure it fits properly in the
rubber seal. Then lock the cowling again
by moving the levers downward.
cC
301052
The air intake grills 1 on the top cowling
are not designed as handles and may
break if used as such.
q
q
301053*
EMU01146
FLUSHING DEVICE
This device 1 is used to clean the cooling
water passages of the motor using a gar-
den hose and tap water.
NOTE:
q
Refer to "Cleaning Cooling-water Pas-
sages" in Chapter 4 for instructions on
usage.
313024
2-20
Advertisement
Chapters
