Manually Connecting The Subwoofer Or Surround Speakers - Samsung HW-Q950T Full Manual

Manually connecting the Subwoofer or Surround Speakers

Before performing the manual connection procedure below:
• Check whether the power cables for the Soundbar and subwoofer or Surround Speakers are
connected properly.
• Make sure that the Soundbar is turned off.
1. Turn off the Soundbar main.
2. Press and hold ID SET on the rear of the subwoofer and surround speakers for at least 5 seconds.
• The red indicator at the rear of each speaker turns off and the blue indicator blinks.
Rear of Subwoofer
x 2
3. Press the Up button on the remote control for 5 seconds.
• The ID SET message appears on the display of the Soundbar for a moment, and then it
disappears.
• The Soundbar will automatically power on when ID SET is complete.
5 Sec
POWER
Rear of the Left and Right Surround Speakers
5 Sec
5 Sec
ID SET
ENG - 16
Blinking blue
Rear of Subwoofer
Blinking blue fast
fast