Duramaxx Trailer Swift Manual page 25

EN
10. Assembly of the jogging stroller
Included is a jogging stroller set that allows jogging when the trailer is not
attached to the bike. With the instructions below, you can turn the trailer into
a walking pram in no time at all.
Insert the handles into the handle holder (round rods at the back of the sides).
Align the holes in the handles flush with the holes in the bar so that you can
pass the securing pins through. Insert and secure with the spring clip (see
picture below).
Insert the rectangular tube of the front fork into the rectangular tube of the
front underside of the trailer. Keep the holes flush. Attach the fork to the
trailer by tightening the black knob.
Note: Make sure that the locking pin is fixed with the spring clip.
25