Cuckoo CRP-HU10 Tool Series Operating Instructions Manual page 13

error coDe AnD PossiBLe cAUse
Warm / Reheat button
Used to warm or reheat.
(Refer to page 23)
Preset / Auto
Clean button
Used to preset time.
(Refer to page 21)
Used to operate automatic
Steam clean function.
(Refer to page 17)
※ When you an image like one in the right side on your display, it means the rice cooker is in
'Waiting' mode.
※ Press 'Cancel' button to enter the 'Waiting' mode.
※ Press the button until you hear the buzzer sound. The image of the plate may different.
Error Code and Possible Cause
When the product has any problems or used it inappropriately, you can follw the below marks.
If error persistently shows up even in normal using conditions or after taking measure, inquire with customer service .
When the inner pot is not placed into the unit.
Problem on temperature sensor.
When pressing the "PRESSURE COOK" and "PRESET" button, while the lid handle is on "Unlock"
Turn the lid handle "Lock"
It is appears on the display when you press "PRESSURE COOK" or "PRESET" button again, or if the Cooking has finished
and you've nerver ever tured the handle to "Unlock", Ih can be by turning handle to "Unlock" and then turn to "Lock"
Problem on environment sensor.
Problem on micom memory.
Problem on micom communication.
fUncTion oPerATing PArT /
Display
Time Button
Used to modify preset time(Refer to page 21).
Used to set GABA and multicooking time
(Refer to page 17, 20).
Pressure Cook / Turbo Button
Used to start cooking
(Refer to page 16~17)
Cancel button
Used to cancel a selection of Mode or
releases remaining Steam inside of rice
cooker.
Porridge button
Use when cooking Porridge
Menu / Selection button
Use to select GLUTIN.RICE, TURBO
GLUTIN.RICE, MIXED RICE, GABA RICE,
SCORCHED RICE, MULTI COOK,
PORRIDGE, DRIED RICE, All-Purpose
steaming and Automatic Sterilization
(Refer to page 16~17)
<Screen on standby>
13