Download Print this page

Cuckoo CRP-HU10 Tool Series Operating Instructions Manual page 12

Ih electric pressure rice cooker

Advertisement

Available languages

Available languages

hoW To cLeAn
How to clean the pressure weight nozzle
If the valve hole underneath the pressure weight is clogged, puncture it with the cleaning pin
•The valve hole of the pressure weight allows steam to release. Check regularly to ensure that it is not
blocked. If the valve hole of the pressure weight is blocked, the hot steam and hot content within the
cooker can cause serious injury.
※Do not use the cleaning pin for any other use except to clean the valve hole of the pressure weight.
※ Pictures may look different from the actual product
How to
Disassemble the
Pressure Weight
How to clean the soft steam cap
Do not touch the surface of the soft steam cap right after cooking. You can get burned.
❶ Detach the soft steam
cap like the picture.
How to clean drain dish
❶ Separate the drain
dish.
12
▶ Under the Lock/Unlock handle is the steam cap that guards the pressure weight. To remove the
pressure weight, remove the steam cap, turn the pressure weight counter-clockwise while pulling it
up, and keep turning until it comes out.
▶ Puncture the clogged valve hole with the cleaning pin and reassemble it by turning it clockwise.
▶ When the pressure weight is properly assembled, it can freely be turned.
Packing
Packing guide
❷ Press the hook in the back, and follow the arrow to
detach and clean. Make sure you clean frequently
with a sponge or a neutral detergent.
※ When fitting the rubber packing into the plate,
please make sure the packing is facing the
correct direction.
a neutral detergent
❷ Separate the drain dish
❸ Clean the drain dish
cap by pushing it
cap and drain dish
down.
with a neutral
detergent.
Soft steam cap
Cleaning Pin
※ Attached on the
bottom of the unit
Pressure Weight
❸ Assemble the vent so
that it fits into the
groove perfectly.
❹ Securely put in the drain
dish cap after cleaning
Alien
substance
❹ After you attach the soft
steam cap to fit into the
groove, press 'A'part
firmly to assemble the
soft steam cap into the
product.
❺ Insert the drain dish
firmly by pressing it in
direction of the arrow
(as shown in the picture
above).

Advertisement

loading