Fan Motor Removal - Fujitsu WATERSTAGE WOYG160LJL Maintenance Document
Air to water heat pump split single service and integrated dhw type
Hide thumbs
Also See for WATERSTAGE WOYG160LJL:
- Installation manual (84 pages) ,
- Design & technical manual (121 pages)
Table of Contents
Advertisement
▼ Fan motor removal
Remove the 5 mounting screws.
Remove the FAN GUARD
by sliding upward.
Cut the binders.(2 places)
Remove the 4 mounting screws.
Waterstage / Maintenance Manual / 2105 - EN
Screws
Screws
Remove the nut.
And remove the PROPELLER FAN
Note at the installation.
Insert propeller Fan and Moter shaft reference
D cutting position.
And the tightening torque at the installation.
Tightening torque is from 10 to 12 N.m.
Binders
Loose the wire clamp, and
remove the lead wires.
Remove the FAN MOTOR.
Note at the installation.
Motor wire is underside of Fan motor.
- 107 -
Hide quick links:
Advertisement
Table of Contents
