Housing Cover Assembly Replacement
1. Mount the housing cover assembly to the mower deck
a)
Fold the handle to the grass bag removal position (Fig. 18)
b)
Hold the housing cover assembly, turn it and pass it through the handle (Fig. 19)
c)
Pull the cutting height adjusting bar and make it come through the depth stop plate(Fig. 20)
d)
Align the housing cover assembly with the lower deck and press it in place. Make sure the
screw domes will NOT crush or press the cables inside. You can install the battery case and
plug the connectors to test the function first before locking all the screws.
18
19
Assembly
20
28