EGO LM2000E Repair Manual Line page 14

Blade Installation
5. Turn the fan by hand to align the holes in the blade with the through holes in the fan.
6. Place a metal rod (e.g., a long bit) into the aligned holes to act as a stabilizer. Place another
metal rod (e.g., a manual screwdriver) into the fixing hole on the deck to act as another
stabilizer.
7. Use a 14mm torque wrench to tighten the bolt clockwise. The recommended torque for the
blade bolt is 49-59Nm.
Align the holes
Tighten
Stabilizer 2
Stabilizer 1
14