Disposal Of The Packaging; Attachment; Technical Data; Notes On The Eu Declaration Of Conformity - Parkside PWM 4 A1 Operating Instructions Manual

Disposal of the packaging

The packaging materials have been selected for their environmental friendliness and
ease of disposal and are therefore recyclable. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings: 1–7: plastics,
20–22: paper and cardboard, 80–98: composites.

Attachment

Technical data

Water quantity meter
Power supply
Water temperature
Environmental temperature
Measurement tolerance
Max. operating pressure
Max. flow rate
Flow range
Water connection
Protection type
* Measurements outside this flow range are not to be taken into account. The specified measur-
ing tolerance is not guaranteed.

Notes on the EU Declaration of Conformity

This appliance complies with the essential requirements and other relevant
regulations of the Electromagnetic Compatibility Directive 2014/30/EU and the
RoHS Directive 2011/65/EU.
The complete EU Declaration of Conformity is available from the importer.
PWM 4 A1
1 × 3.0 V (DC)
Battery type CR 2032
5–40°C
5–60°C
± 5% (minimum ± 0.5 l)
12 bar
1800 l/h*
2–30 l/min*
G¾" (26.44 mm)
IPX4 (splashproof)
GB │ MT │
45 ■