Settings On Control Display - BMW 2008 5 Series Owner's Manual

Stopwatch
iDrive, for operating principle refer to page 16.
1. Open the start menu.
2. Open "Navigation".
Without navigation system
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Stopwatch" and press the control-
ler.
Starting, stopping or resetting
> Select "Start" and press the controller.
The stopwatch starts at the displayed time.
> Select "Reset" and press the controller.
The stopwatch is reset and it restarts if it
was running beforehand.
> Select "Stop" and press the controller.
This stops the timer.
Taking an intermediate time reading
Select "Interim time" and press the controller.
The interim time appears below the ongoing
primary stopwatch count.
All of the other functions remain available
even while the stopwatch is running. The
stopwatch continues operation in the back-
ground.<
86
Online Edition for Part no. 01 41 0 014 240 - © 08/07 BMW AG

Settings on Control Display

iDrive, for operating principle refer to page 16.
1.
*
:
2.
3.
Setting time
1.
Press the button once or twice until
the start menu appears.
Press the controller to open the menu.
Turn the controller until "Settings" is
selected and press the controller.
Turn the controller until "Time / Date" is
selected and press the controller.