Advertisement
6th step: adjustments
After having finished the above-mentioned steps, the following steps do not need to be followed. They
are necessary in case the individual parts do not properly match. To operate this spreader, push the
handle up. You can shift the position of the wing nut on the pressure gauge and lever to adjust the
spacer of the three holes between the hopper and adjustable plate according to your needs.
© by WilTec Wildanger Technik GmbH
Item 60910
Page 9
http://www.WilTec.de
http://www.aoyue.eu
06
2021-1
http://www.teichtip.de
Advertisement
