Advertisement
4th step:
1. Set in the inner axle box into the outer axle box, making sure that they are securely seated.
2. Mount the right wheel construction to the right axle with the M5×45 hexagon socket screw and
M5 counter nut, then mount the end cap on the right axle with a wooden or rubber mallet.
3. Now mount the left wheel construction to the left axle inserting a ⌀16 washer, and mount the
end cap on the left axle with a wooden or rubber mallet.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 60910
Page 7
06
2021-1
Advertisement
