Using The Id Mode Button - Sony FWD-S42H1 Operating Instructions Manual

Using the ID MODE button

You can operate a specific display without affecting
other displays installed at the same time.
1
Press ON button.
Display's "Index Number" appears in black
characters on the lower left menu on the screen.
(Every display is allocated an individual preset
"Index Number" from 1 to 255.)
Index Number
Index Number : 117
2
Input the "Index Number" of the display you
want to operate using the 0 - 9 buttons on
the remote control.
The input number appears right next to the "Index
Number" of each display.
Index Number :
3
Press SET button.
The characters on the selected display change to
green while the others change to red.
You can operate the specified display indicated
with green characters only.
Only the operation of POWER ON switch and
STANDBY/ID MODE-OFF button is effective to
other displays, as well.
Input Number
117 117
4
When all of the setting changes have been
completed, press OFF button.
The display returns to the normal screen.
To correct the Index Number
Press the C button to clear the current input "Index
Number". Return to Step 2, and input a new "Index
Number".
Tip
To change the "Index Number" of the display, see "Index
Number" in "Control Setting" on page 30.
GB
17
GB