ATN Night Spirit MP User Manual page 6

Multi-purpose system

Table of Contents

GOGGLE KIT

To mount the ATN Night

S p ir i t M P to a h e ad

mount, perform the fol-

lowing:

1. Loosen the nut (C). At-

tach the adapter (A) to

the rail (B) of ATN Night

Spirit MP. Tighten the

nut (C) anew.

2. Align the adapter and

the head. Slide the mon-

ocular rearwards until

the alignment boss (D)

aligns with the alignment

groove (E) on the head-

mount. Push until the

monocular locks into the

headmount.

3. Place the headmount with Night Spirit MP onto a head.

4. Slide button (F) and move the unit along the rail for eye relief adjustment.

5. The Night Spirit MP headmount has a flip-up mechanism. Push the button (G) on the side of

mount and lift the unit up until the unit reaches in the top position.

6. Push the same button (G) to lower Night

Spirit MP to the viewing position. Turn

the device on for continuation of the op-

eration.

7. The Night Spirit MP can be placed be-

fore the right or left eye. In order to re-ad-

just the monocular for use with another

eye, take the unit off the adapter, turn the

unit to other side (for 180º) and mount it

on the headset through the rail on this

side. Push the button (H) and move the

device along the slide-rail (I) for comfort-

able position.

( O P T I O N A L )

Table of Contents