Table of Contents
Advertisement
850 mW INFRA-RED ILLUMINATOR
Infra-red (IR) Illuminators are common for night vision technology. The IR light greatly
enhances the performance of your Night Spirit MP, while remaining almost totally invisible
to the naked eye. In dark environment, power up the Night Spirit MP. Now, find a scene and
examine it without the IR on then with IR powered up. Note the difference in illumination. It is
important to remember that the IR illuminator is simply an infra red light source, and like any
light source it may loose its effectiveness over a great distance.
Battery
Housing
Fixation
Screw
You could change the IR control panel fitting your needs. The wrench included into the set
should be used for weakening the fixing nut located on the IR. Rotate the IR placing at in the
most convenient position. Tighten the nut with the wrench to fix the new position.
IR Brightness
Adjustment
IR Windage
IR
Elevation
IR Focusing
To fix the IR illuminator to the rifle-
scope use the picatinny raile of the
scope.
The IR illuminator control but-
tons are located on its side. To
switch the Digital IR illuminator
on/off press "+" and "-" buttons
simultaneously. When the IR illumi-
nator is switched on you can see the
green LED lit. By pushing the but-
tons "+" and "-" you may adjust the
IR brightness.
The IR beam is focusable to change
the field of coverage. To change the
beam width slightly turn the IR lens.
5
Advertisement
Table of Contents
