Advertisement
REAR PANEL
FOOT SWITCH
Use any single button foot switch to select between gain controls.
FX SEND
Connect to buffered effects loop. Connect to the input of your
effects device. This loop is a low level loop, and works best with
effects pedals.
FX RETURN
Connect the output of your effects device here.
IMPEDANCE SELECTOR
Select the output impedance of the amplifier between
16, 8 and 4 Ohms. Always match the impedance with the
speaker cabinet.
SPEAKER OUTPUTS
Plug into the speaker cabinet; always match impedance.
Do not operate without load or speaker connected.
COMPENSATED LINE OUT
Line level outputs. Speaker response compensated for DI use.
Always maintain a speaker load while using line output.
LAMP OUTPUT
Connect to optional lighted speaker cabinet.
AC INLET
Always plug into a grounded outlet of the correct voltage.
FUSE
T3L 250V (100-120VAC); T1.6L 250V (220-240VAC)
Advertisement
