Parts Of The Hearing Aid And Charger - Phonak Audeo P-RL User Manual

Multi-function button with indicator light
The button has several functions. It
functions as an on/off switch, a volume
control and/or a program change depending
on the hearing aid programming. This is
indicated in your individual instructions.
Phone calls: If paired with a Bluetooth®
enabled phone, a short press will accept
and a long press will reject an incoming call.
On/Off: Firmly press the lower part of the button for
3 seconds until the indicator light blinks.
On: indicator light is solid green
Off: indicator light is solid red
Enter flight mode: When device is off, press the lower part
of the button for 7 seconds until the solid orange light
appears. Then release the button.
Tap Control (only available for models P90 and P70)
If paired with a Bluetooth enabled device, multiple functions
can be accessed using Tap Control, please refer to chapter 10.
This is also indicated in your individual instructions.
To use Tap Control tap the top of your ear twice.
8

2. Parts of the hearing aid and charger

The following pictures show the hearing aid model and
charger accessories described in this user guide. You can
identify your personal models by:
• checking "Your hearing aid and charger details" on
page 3.
• comparing your earpieces, hearing aid and charger with
the following models.
Possible earpieces
Audéo P-RL
Audéo P-RL Trial
Tube
Anchor (optional)
Speaker
(without earpiece attached)
Dome SlimTip cShell
Multi-function button
with built-in
indicator light
9