5.1.7.4 Switching output x: Switch-on delay
In the menu Advanced functions
output x. The submenu can be found on the second submenu level.
The switching and switch-back delay prevents the alarm from responding too
frequently in unstable conditions. The switching delay is set in the following menu:
The following options are available:
Setting range: 0...100 seconds
Time period in seconds in which the signal must be permanently present
for the switching output to respond.
Notice:
▶
▶
5.1.7.5 Switching output x: Switch-back delay
The switch-back delay is set in the following menu:
The following options are available:
Setting range: 0...100 seconds
Delay of the switch-back signal for OUT x.
Time period in seconds in which the signal must be permanently present
for the switching output to respond.
Notice:
▶
▶
further settings can be made for the switching
efx
If the switching output OUT x has been assigned the window
function, the set value corresponds to the switch-on delay which
detects a valid reaching of the measuring window.
If the switching output OUT x has been assigned the frequency
output function, this value has no effect.
If the switching output OUT x has been assigned the window
function, the set value corresponds to the switch-on delay which
detects a valid leaving of the measuring window.
If the switching output OUT x has been assigned the frequency
output function, this value has no effect.
Operation
RE 51550-B/09.2019, Bosch Rexroth AG
25/46